Photovoltaic 1000 DC Power SPD
SPD for DC power, 1000v spd; In(8/20us): 20kA/phase, Imax: 40kA/phase; hot-pluggable; fault indication;
Features & Advantages of Photovoltaic SPD
Status indication:
Green: OK
Red: Failed
DC power surge protector modules can be replaced online.
Remote alarm output is optional, named with "F".
It is normally installed at the boundary of LPZ1 and LPZ2 or subsequent LPZs.
Parameter of Photovoltaic dc spd 1000v
|
T2-1000T2-1000F |
|
|
1000VDC |
|
|
Short-circuit current rating Iscpv |
1000A |
|
Nominal discharge current In(8/20µs) |
20kA |
|
40kA |
|
|
Voltage protection level Up |
4kV |
|
Recommended backup fuse |
80A gG |
|
Recommended grounding cable |
6~35mm2 |
|
Response time |
25ns |
|
Residual current IPE |
<10μA |
|
Remote alarm output |
250VAC/0.5A;24VDC/0.5A |
|
Housing protection grade(IEC60529) |
IP 20 |
|
Housing material/inflammability rating(UL94) |
PA66/V0 |
|
Testing standard |
IEC 61643-31 |
SHANGHAI CHENZHUINSTRUMENT CO., LTD. is a very established provider that specialises in automation safety. We have over 24 years of experience in the design and manufacture of intrinsic barrier, surge protection device, isolated signal conditioner, safety relay, low power transmitter and signal spd.
Send product request
Other supplier products
 |
Safety Relay | Safety Relay Automation direct safety monitering relays are mainly applied to the safety control circuit, connecting the safety sensing elements a... |
 |
Temperature Transmitter | CHENZHU, a reliable temperature transmitter manufacturers, provides a large range of head-mounted temperature transmitters at an affordable price. ... |
 |
AC Power SPD | The power surge protector for power surge ac unitis designed to prevent transient surge conditions. Large single surge events, such as lightning, c... |
 |
Safety Mat Safety Relay | Safety mat relaymodules provide a high level of fail-safe operation for critical processes and protection. This safety mat and multi-function contr... |
 |
Safety Relay | Automation direct safety relays are mainly applied to the safety control circuit, connecting the safety sensing elements and mechanical equipment m... |
