Molybdenum Sputtering Target
Molybdenum sputtering targets include molybdenum plane targets (molybdenum round targets and molybdenum strip-type targets) and molybdenum rotating targets.
Molybdenum plane targets are formed by processing high-quality plates of our company, and feature high density, no crack and sand hole inside, bright surfaces, uniform color and luster as well as accurate dimensions.
Small molybdenum rotary pressing targets are processed by high-quality bars, and feature accurate dimensions, smooth surface, high purity, etc.
Molybdenum rotating targets of the conventional size are produced by a hot isostatic pressing process, and feature high density (10.15 g/cm³), fine grains and good molding.
Conventional density: 10g/cm³~10.15g/cm³;
Special process density: more than 10.15g/cm³.
If you would like to know molybdenum sputtering targetspecific prices, please do not hesitate to contact the CS molybdenum sputtering target supplier.
Molybdenum Sputtering Target Specifications
Element |
Mo |
||||
Purity |
≥99.95%(3N5) |
||||
Typical sample dimension |
φ153mm×φ123mm×1114mm |
||||
Density |
|||||
Hardness |
HV5:246-253 |
||||
Grain Size |
35μm |
||||
Appearance |
Ra≤0.4μm |
||||
Impurity Content(powder) |
Pb |
≤5ppm |
C |
≤20ppm |
|
Cd |
≤5ppm |
Sb |
≤10ppm |
||
Si |
≤10ppm |
Ni |
≤30ppm |
||
Cu |
≤10ppm |
P |
≤5ppm |
||
Mg |
≤10ppm |
N |
≤50ppm |
||
Bi |
≤5ppm |
||||
Al |
≤15ppm |
||||
Ca |
≤15ppm |
||||
N |
≤ppm |
Note: all the specifications of the molybdenum sputtering target can meet the requirements of customers on high accuracy through machining.
Molybdenum Sputtering Target Application
Molybdenum sputtering target can be formed on the substrate film, widely used in electronic components and electronic products, integrated circuits, information storage, liquid crystal display, laser memory, electronic control devices; It can also be used in glass coating field; Molybdenum sputtering target can also be used in wear-resistant materials, high temperature corrosion, decorative supplies and other industries.
Molybdenum Sputtering Target Alloy Series
In addition to molybdenum sputtering target material, we can also provide molybdenum-titanium alloy, molybdenum-rhenium alloy, molybdenum-niobium alloy, molybdenum-copper alloy, molybdenum-lanthanum alloy, molybdenum-tantalum alloy, etc.
Advantages Of Molybdenum Sputtering Targets
High Purity: Our Molybdenum Sputtering Targets boast a purity level of over 99.97%, ensuring optimal performance and minimal impurities in your coating processes.
Maximum Density: With a density of over 99.5%, our Molybdenum Sputtering Targets provide superior sputtering efficiency and uniformity.
Homogeneous Microstructure: The homogeneous microstructure of our Molybdenum Sputtering Targets ensures consistent sputtering performance and high-quality coatings.
Expertise in Coating Solutions: As a center of expertise for new coating solutions, CS Titanium provides not only high-quality Molybdenum Sputtering Targets but also expert advice and support to help you optimize your coating processes.
Send product request
Other supplier products
Titanium Capillary Tube | Normally titanium tubes with an outside diameter of less than 3mm as capillaries. The main raw materials are gr1, gr2, gr5, and gr5 Eli. With the d... | |
Molybdenum Sheet & Molybdenum Foil | In refractory metals, molybdenum sheet has good thermal conductivity, electrical conductivity and low thermal expansion coefficient, has high stren... | |
Molybdenum Rod | Grade: Mo1 Mola TZM Standard: GB/T4188-1984 Surface condition: Black, Alkali wash, Bright, polished. Molybdenum Rod Specification Chemica... | |
Molybdenum Electrode | Molybdenum electrodemade by powder metallurgy technology with pure molybdenum powder has high melting point, high temperature strength and hardness... | |
Titanium Threaded Rod/Bar | Threaded titanium rods are also called titanium threaded bars, which are made by thread rolling or machining titanium rods directly. Threaded titan... |
Same products
Top Bend 16*5mm Overlength Transparent Silicone IP67 Flex Neon Strip | Seller: PANERALUX LIGHTING(NINGBO) CO.,LTD | 50 meters super long working length, with 24Vdc safety voltage, IP67 protection level + IK08 anti... | |
Type1 Portable EV Charging Cable | Seller: Hangzhou Jiayuan Import And Export Co., Ltd | The cable conforms to the SAE Standard (USA) of EV Charging, which suits electric vehicles manufa... | |
LED Gas Price Sign | Seller: Han Way International Industry Co.,Ltd | LED Gas Station Signs of pricing change by remote control, change by remote control. It is easy t... | |
Molybdenum Wire | Seller: Baoji City Changsheng Titanium Co.,Ltd | Molybdenum spray wireis mainly refers to the wire cutting processing with high pressure electric ... | |
Molybdenum Sputtering Target | Seller: Baoji City Changsheng Titanium Co.,Ltd | Molybdenum sputtering targets include molybdenum plane targets (molybdenum round targets and moly... |