.

Super Cell Rubber Fender

Super Cell Rubber FenderThis is a  high performance rubber fenders,Website:, which have high Energy Absorption,while keeping Reaction Force to a minimum.It have a cylindrical elastomeric section with steel mounting plates permanently bonded at each end. Under axial loading, the cylindrical section buckles radially. This controlled, multi-directional dispersion of energy combines the high absorption efficiency of the buckling column with a stable geometric shape.Feature:1.Compare with general cell rubber fender, its rated compression raised 5%, the reaction force is basically the same, while the energy absorption nearly rase 17%.The value of unit reaction force/energy absorption (E/R-H) nearly rise 15.2. With front panel in the margin of fender.It can lower the pressure of the side board of the ship, the pressure can be controlled at below 200KN/m², it specially apply for the berthing of large model ship.3. UHMW-PE is set in the front of panel, it can reduce the friction factor between ship and fender,and lower the shear power while the ship berthing,and raise the life of fender using.4.the super cell fenders have more reasonable structure, high performance and good durability.5.Higher Energy Absorption with lower Reaction Force.6.Excellent performance at large berthing angles7.Low friction UHMW pads on frontal frame uniform deformation under shear load extends life.8.Suitable for large and middle oil dock,coal doaks etc.Specification Sizes:Specification      (mm)H h D1 D2 Holes Φd JR--AA  JR--AA  JR--AA  JR--AA  JR--AA  JR--AA  JR--AA  JR--AA  JR--AA  JR--AA  JR--AA  JR--AA  JR--AA  Dynamics Performance :(1): High reaction force; High reaction force; Standard reaction force; Low reaction force(2): Performance tolerance: ±10%



Send product request

To: Chongqing JERI Marine Equipment Co.,Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

EVA Foam Filled Fender
EVA Foam Filled Fender EVA Foam filled fender is a new polymer synthetic material between rubber and plastic, with both high strength of plastic and long range elasticity...
T Head Bollard
T Head Bollard Bollard Capacity : 10 to 200 Tonnes Material : Cast Steel , Cast Iron Surface : black bitumen paint Packing : refer to client`s request Deli...
PVC Buoy
PVC Buoy The PVC Buoy is  made by roll plastic rotomolding.It have stronger resistance to impact and corrosion resistant ability; Uv radiation Durable an...
Cylindrical Type Rubber Fender
Cylindrical Type Rubber Fender Cylindrical Type Rubber FenderCylindrical fender can be easy to install and operate,Website:, versatile and highly cost effective. It is widely use...
Inflatable PVC Fender
Inflatable PVC Fender Our Yacht fender is made by pecial explosion-proof technology with the high quality PVC materials. It have stronger resistance to impact and corros...
All supplier products

Same products

ПВХ стеновые панели лист экструзионная производственная линия
ПВХ стеновые панели лист экструзионная производственная линия Seller: Qingdao Aishangyi International Trade Co., Ltd.
Экструзионные линии по производству сайдинга, панелей, черепицы, профильно-погонажных изделий из ПВХ, ПП,ПЭ 
Экструзионные линии по производству сайдинга, панелей, черепицы, профильно-погонажных изделий из ПВХ, ПП,ПЭ  Seller: Qingdao Aishangyi International Trade Co., Ltd.
экструзионные линии для производства профиля из ПВХ, ПП, ПЭ, ПК, АБС
экструзионные линии для производства профиля из ПВХ, ПП, ПЭ, ПК, АБС Seller: Qingdao Aishangyi International Trade Co., Ltd.
3.2Экструзионные линии по производству профилей ПВХ
3.2Экструзионные линии по производству профилей ПВХ Seller: Qingdao Aishangyi International Trade Co., Ltd.
Двухшнековая экструзионная линия для производства полимерных изделий ДПК (WPC)
Двухшнековая экструзионная линия для производства полимерных изделий ДПК (WPC) Seller: Qingdao Aishangyi International Trade Co., Ltd.