TT 40-250 Roof Panel Roll Forming Machine

1. General parameters

1). Thickness of steel coil: 0.3-0.9mm

2). Material: PPGI, GI

3). Input width: 1220mm

4). Output width: 1000mm

5). Total length (from de-coiler to output table): about 13M

6). Total weight: about 13T

7). Tolerance of length: 10±2mm

8). Transporting: 1×40ft Container

2. Main roll forming machine

1). Machine stand: 350H steel welding structure

2). Guide feed way: side sliding type

3). Structure: wall panel, thickness 14mm

4). Number of stations: 15 stations

5). Main shaft material: 45# steel, O.D.: 80mm, quenching and tempering treatment

6). Roller material: high grade 45# steel, quenching 58-62℃

7). Way of drive: by chain

8). Forming speed: 8-10 m/min

9). Main motor power: 5.5kw

10). Power supply: 380V, 50HZ or at buyer’s requirement, 3-Phase

11). Motor is under the mould, which can save space

12). Dimension (L*W*H): 9.0×1.7×1.6m

1). Material of blade and mould: Cr12MoV steel with quenched treatment 60-62℃.

2). Cutting system: adopt advanced hydraulic cutting system, automatic cut after forming no distortion, waste, high safe factor(main motor stops and then cuts).

3). Cutting type: stop machine cutting.

1). Screen display:Mitsubishi or Siemens touch screen;

2). PLC: Mitsubishi or Siemens;

3). Measure the length automatically;

4). Count the quantity automatically;

5). Length and quantity is controlled by computer, the machine will cut automatically as reaching the set length, the machine can automatic stop;

6). It is easy to adjust the error of length;

7). Meter count way: rotary encoder;

1). YUKEN system, made in China;

2). Power: 4KW;

3). Oil pump of hydraulic station: gear pump;

4). Hydraulic cylinder: 100mm;

5). Structure of cutting: size of hydraulic station 55×65×90mm;

6). 1 set of electro valve;

7). The oil pipe can not be welded type (protective of oil leak), treatment of welding spot of total machine.

De-coiler; Roll Forming Machine Unit; Hydraulic Automatic Cutting Unit; Run Out Table; PLC Control Cabinet; Electrical system; Hydraulic system.

De-coiler→ Feed with guide→ Roll forming→ Hydraulic cutting unit→ Run-out table→ PLC control system

Other supplier products

	steel coil slitting machine	Introduction of the steel sheet slitting line: Slitting line machine is not only for the steel service cutting industry, but also for the pipe i...
	Expanded Mesh Slitting Line	Process flow: The expanded mesh slitting line production line firstly use the de-coiler to initiative release galvanized steel plate or stainless ...
	Expanded Diamond hole metal mesh machine 1250mm	General description: ANBER high speed expanded mesh machine, it is high speed and CE certificated. Detailed description: Expend mesh machine is a ...
	ABE-3-1250 steel plate expanded mesh machine	Composition of metal expander: The expanded metal mesh machine is composed of framework, driving system, crankshaft connection rod, knife rest, fe...
	Steel coil cut to length line （0.7-6mm）×1600mm	The cut to length line is used to take flat rolled steel or coiled steel unroll it level it and cut it to desired length sheet. Moreover, any speci...

All supplier products

Same products

	Thrust Roller	Seller: CITIC IC LUOYANG HEAVY MACHINERY CO., LTD	CIC is a more than 30-year manufacturer and reputed supplier of thrust roller used in rotary kiln...
	HBY-30 Constant Temperature Water Curing Box (horizontal)	Seller: Zhejiang Luda Machinery Instrument Co.,Ltd	This type of water curing tank is designed and manufactured according to the maintenance requirem...
	HBY-30 Constant Temperature Water Curing Box (vertical)	Seller: Zhejiang Luda Machinery Instrument Co.,Ltd	This type of water curing tank is designed and manufactured according to the maintenance requirem...
	FSY-150 Cement Fineness Negative Pressure Sieve Analyzer (ordinary)	Seller: Zhejiang Luda Machinery Instrument Co.,Ltd	This equipment is widely used in cement fineness inspection and cement production control. It can...
	FZ-31 Boiling Box	Seller: Zhejiang Luda Machinery Instrument Co.,Ltd	This equipment is one of the commonly used equipment in cement production, construction, scientif...