Squeeze Die Casting

• 

The squeeze die casting, also called extrusion casting or liquid die forging, is a kind of newly developed metal forming technic that combines the casting process and dies forging method.

The basic principle of squeezing die castingis to fill the liquid metal into the pre-lubricated mold cavity, then give sustained pressure to the metal, thus forming the solidifying hard shell. The metal crystallization and solidification process are conducted under the pressure, so the defects such as shrinkage and porosity are greatly diminished. An almost defects-all-free product could be achieved by this technic.

Types of Squeeze Die Casting

There are 2 subdivisions of squeeze die casting: direct squeeze die casting and indirect squeeze die casting. The formal technic is to give the pressure directly on the surface of liquid metal, while the last technic is to pressure the liquid maintaining in the gating part of the casting mold. Usually, the direct squeezing die casting has a better-resulted product than the indirect squeeze die casting.

What Is Squeeze Die Casting What Are Its Advantages?

Squeeze die casting is a process method to obtain castings (or ingots) by applying high mechanical pressure to liquid (or semi-solid) metals and metal matrix composites that enter the casting mold at a low speed so that they can be formed and solidified under pressure. Squeezing die casting is the product of the combination of casting and forging, which is a process between casting and forging. Squeeze die casting is close to forging in terms of performance.

The squeeze die casting process method can cast more complex pieces than forged parts. Due to the pressure molding, compared with other casting methods, the density of squeezing die casting is higher. Compared with forging, the price is relatively low because the mold is formed once. Due to the solidification under pressure, there are fewer internal defects, close to the forging organization, so the squeeze die casting parts can be heat treated.

What Is Squeeze Die Casting Used For In Automobile Parts?

At present, die-casting is a more mature process method, which is relatively cheaper. First of all, a large number of applications in engine pressure casting. Compared with sand casting, squeeze die casting has the advantages of fast and high precision.

In terms of strength, squeezing die casting also can meet the requirements. However, the surrounding bearing parts have a tendency to use pressurized casting.

Squeeze die casting could achieve vertical filling. High-pressure aluminum alloy liquid enters the mold cavity from the bottom upwards. The gate area is larger and the speed is slower, thus the gas can be exhausted from the exhaust tank. Squeezing die casting is suitable for making wall thickness parts. Most automotive parts can be made by squeeze die casting, but it is not advantageous for thin-walled parts. With the increasing call for lighter cars and lighter cars requiring more and more, squeeze die casting is a technology with greater prospects.

As a professional metal casting supplier,We provide sodium silicate casting, sodium silicate sand casting, squeeze casting aluminum, etc. Want to know more, contact us.

Other supplier products

	Silica Sol Investment Casting	The silica sol also shares the name of water glass in general, it is used by the meatal casting process as mold adhesive which is mixed with sand a...
	Stainless Steel Investment Casting	The stainless steel has much better physical properties then iron and normal steel, but it possesses worse casting properties. Because the stainles...
	Ductile Iron Casting	Ductile iron is a type of graphite-rich casting iron, but it has not a long history that it was discovered in 1943. Ductile iron actually is not...
	Sodium Silicate Sand Casting	Sodium silicate is a generic name for chemical compounds with the formula Na2SiO3. This material is generally colorless transparent solids, or in w...
	Die casting	Die Casting involves 3 key elements: the die casting machine, the mold, and the alloy materials, and the die casting could be described as the proc...

Same products

	Industrial 3-Piece Stainless Steel Valve Parts	Seller: Qingtian Baoli Casting Co., Ltd.	Industrial 3-Piece Stainless Steel Valve Partsare manufactured for use in pipelines and process s...
	METAL BRACKETS	Seller: JCL Precision Part Co.Ltd.	Custom metal brackets are some of the strongest supports. JCL precision-engineers them to your cu...
	Ceramic Core Injector	Seller: Qinhuangdao Aifu Science & Technology Co., Ltd.	The Ceramic Core Injector is designedspecifically for producingcomplex, high quality and high pre...
	Wax Injection Machine	Seller: Qinhuangdao Aifu Science & Technology Co., Ltd.	The Wax Injection Machine is used to make wax patterns in the investment casting process with mid...
	Automatic Dewaxing Autoclave	Seller: Qinhuangdao Aifu Science & Technology Co., Ltd.	Dewaxing Autoclave is specially designed for removing the wax patterns in the ceramic shell. Ins...