Stainless Steel Investment Casting
The stainless steel has much better physical properties then iron and normal steel, but it possesses worse casting properties. Because the stainless steel has higher melting temperature point, by the liquid form it has worse flowability and bigger shrinkage ratio, and more easier to be oxidized. To prevent the happening of defects such as crack, sand stick, under-pounding etc., a series of more complicated technics are applied in the casting, thus the success rate of stainless steel casting Chinais able to greatly be improved.
Features of Stainless Steel Castings
Take higher metal temperature reaches to 1520~1600℃. For the small and complicated structure part keep the pouring temperature to melting point +150℃; for the big and thick wall part keep the pouring temperature to melting point +100℃;
Make bigger and simpler gating tunnel;
Use dry or heated casting mold;
Make sure the casting product wall thickness is as even as possible and over 8mm, optimize the part structure in sharp corners and edges;
Improve air permeability and passing ability by using hollow mold core or oil-sand core, or add coke with it.
Notice of stainless steel investment casting
For the material used to create the mold shell, similar to the iron casting somehow, the stainless steel casting also uses silica sol and water glass as the adhesive material.
As a professional foundry supplier,We provide sodium silicate casting, sodium silicate sand casting, custom stainless steel casting, etc. Want to know more, contact us.
Send product request
Other supplier products
 |
Sodium Silicate Sand Casting | Sodium silicate is a generic name for chemical compounds with the formula Na2SiO3. This material is generally colorless transparent solids, or in w... |
 |
Sand Casting | Sand casting is the most commonly applied method for casting the metal part. It suits most of the raw materials, ferroalloy, and non-ferroalloy bot... |
 |
Lost Wax Investment Casting | The lost-wax casting process can differ depending on the application and the requirement, but it generally consists the following steps: Molde-maki... |
 |
Compressors & Gears | Rayforce's metal cast iron gearscan be applied to Turbo blowers, air control component, piston compressors, casting gears, etc. Application of C... |
 |
Sand Casting | Sand casting chinais the most commonly applied method for casting the metal part. It suits most of the raw materials, ferroalloy, and non-ferroallo... |
Same products
 |
Industrial 3-Piece Stainless Steel Valve Parts | Seller: Qingtian Baoli Casting Co., Ltd. | Industrial 3-Piece Stainless Steel Valve Partsare manufactured for use in pipelines and process s... |
 |
METAL BRACKETS | Seller: JCL Precision Part Co.Ltd. | Custom metal brackets are some of the strongest supports. JCL precision-engineers them to your cu... |
 |
Ceramic Core Injector | Seller: Qinhuangdao Aifu Science & Technology Co., Ltd. | The Ceramic Core Injector is designedspecifically for producingcomplex, high quality and high pre... |
 |
Wax Injection Machine | Seller: Qinhuangdao Aifu Science & Technology Co., Ltd. | The Wax Injection Machine is used to make wax patterns in the investment casting process with mid... |
 |
Automatic Dewaxing Autoclave | Seller: Qinhuangdao Aifu Science & Technology Co., Ltd. | Dewaxing Autoclave is specially designed for removing the wax patterns in the ceramic shell. Ins... |
