On-line Billet End Continuous Temperature Measurement
ZST-P100 On-line Continuous Temperature Measurement of the Billet End
Overview
Thesystem aimsat the continuous temperaturedetectionof theproductobtained from thecontinuous casting machine. Thebilletsandtheirsurrounding environmental factors such as scale, steam, shielding and other factors,are considered in the scheme design and equipment selection.The accurate detection and real-time transmission of temperatureduring the billets movement are also considered.
The equipment selection
Temperature detection
The billet temperature detection adopts the two-color integrated high-temperature thermometer produced by Wuhan CenterRise M&C Engineering CO.,;Temperature measurement range: 600°C - 1400°C; All components are installed in a sturdy housing for continuous measurement. The optimized treatment is taken for the problems that the semi-finished billets are hindered by steam or other particles (scale) in the environment, and the billets movement and the installation limited field of view. It provides fast, real-time monitoring of high temperature billets.
Equipment cooling
Using vortex air cooling device, no power supply is needed, only dry air is required, and the low temperature cooling gas below 0°C is output to cool the three sets of temperature detection equipment.
Signal transmission
The bidirectional RS-485 communication of the measurement and control system is used among multiple (multi-stream) measuring equipment or among the measuring equipment and the secondary meter. The Industrial Ethernet or DP network communication is used between the secondary instrument and the PLC. The signal transmission equipment adopts the communication equipment supporting multi-protocol network.
Purge device (optional)
When the environmental occlusion is severe, and the main occlusion is gaseous substances such as steam, it is recommended to use a purging device. The purging device uses dry air, and the solenoid valve controls the start and stop.
Software
Adopting DataTemp software to remotely set and monitor the measuring equipment. Adopting ScanTemp software to analyze and process the temperature data and eliminate invalid signals. Through the software model, the interference factors such as steam and iron scale can be overcome and the actual temperature of the casting billets can be displayed in real time.
The features
Using Si/Si stack detector, high sensitivity
It is easy to use and has sturdy housing, which meets NEMA-4 standard
Bidirectional RS-485/DP communication (can be networked), supports up to 32 detection sensors at most
With user-defined alarm methods, analog and digital outputs are synchronized
Use protective devices and air cooling devices, can withstand high temperature environment
Accurate measurement of moving targets or targets obscured by dust, smoke and other particles in the atmosphere
Adopt passive cooling apparatus, high cooling efficiency and low maintenance
Use software to remotely set and monitor, analyze and secondary process the data, and optimize occlusion measurement
The parameters
Measurement range:600℃~1400℃
Response time:10msc)
Spectral response:bicolor
Accuracy:±0.75%
Repeatability:±0.3%
Cooling air pressure:>0.5Kpa
Cooling air flow:24L/min
Max.temperature:165℃
Output signal:485 / DP / 4-20mA
Environment standard:NEMA4(IEC529,IP65)
Send product request
Other supplier products
LAG-S100 Ladle Slag Detection System (Eddy Current) | LAG-S100Ladle Slag Detection System (Eddy Current) Overview The continuous casting ladle slag detection device is used to detect the slag conte... | |
Ladle Comprehensive Management System | LDT-N200 Ladle Integrated Management System Overview: In the steelmaking production process, the ladle is the key equipment for holding molten ste... | |
MAC-G320 Automatic Mold Flux Feeding Machine | MAC-G320Automatic Mold Flux Feeding Machine Overview MAC-G320automaticmoldfluxfeeding systemis a new generation product ofautomaticaddingmoldfl... | |
Handheld Thermocouple Calibrator | Handheld Thermocouple Calibrator Model: LGK-JS02-064 Overview LGK-JS02-064 handheld thermocouple calibrator is a product independently develop... | |
Infrared/Laser Cut-to-Length Cutting System | Infrared/Laser Cut-to-Length Cutting System Overview The all-digital non-contact infrared automatic cut-to-length cutting system developed by W... |
Same products
Replacement of PALL HC8304FAN16H Hydraulic filter element | Seller: Xinxiang Saya Filters Co., Ltd | Product Advantages: 1. Using glass fiber from the American HV brand as the filter layer, the fil... | |
Argo V2.1260-06 Hydraulic Filter Replacement | Seller: Xinxiang Saya Filters Co., Ltd | Performance characteristics of Argo V2.1260-06 Hydraulic Filter Replacement: 1. Good filtration p... | |
Eaton Internormen Hydraulic Filter Replacement | Seller: Xinxiang Saya Filters Co., Ltd | Product Description: The filter elements have the characteristic on high pressure collapse resis... | |
Sullair / Air Filter Replacement | Seller: Xinxiang Saya Filters Co., Ltd | Ayater air filter Introduction: ● Air Filter Element is a critical part of Compressor, made of hi... | |
Replacement Of Paker Hydraulic Filter Element | Seller: Xinxiang Saya Filters Co., Ltd | AYATER hydraulic oil filter element is a mesh made of multi-layer metal stamping, which is manufa... |