GPPE Lottery Paper Core-free Surface Rewinder
Operator responsibilities per cycle: none! Automation: Core shafts are automatically fed into a sorting unit where they are aligned and staged in the autoloader. Core shafts are automatically transferred to the rewinding station, then the core-free surface rewinding machine cuts the tails, wraps the tails around the rolls, tucks the tails, winds the roll to the desired length, transfers the rolls to the sealing station, seals the tails of the finished rolls, transfers the rolls to an exit conveyor and conveys the rolls outside of the machine. Standard Features 1. PLC and HMI touch screen. 2. Recipe screens. 3. Diagnostic screens. 4. Automatic acceleration and deceleration calculations based on master roll diameter and material type. 5. Automatic brake puck selection of this fully automatic core-free surface rewinder based on roll diameter. 6. VPN for remote diagnostics. 7. Automatic core shaft insertion system. 8. Automatic tail tucking system for 1/2” to 1” OD cores. (10mm to 25.4mm). 9. Automatic tail cutter. 10. Automatic gluing system (optional tabbing unit is available). 11. Exit conveyor for automatic roll removal of finished rolls. Production / Cycle Time Estimates 150’ (45 Meters) = 24 Seconds 180’ (55 Meters) = 25 Seconds 328’ (100 Meters) = 35 Seconds Optional Features Flexographicprinting: it is used for online printing when slitting rolls, paper accumulation buffer keeps the printing nonstop during the cycles gap, up to 4 color on-line printing.
Critical Specifications
|
Maximum Web Speed (1-Ply) |
2300fpm (300mpm) |
|
Maximum Web Width (customer specified) |
|
|
Maximum Unwind Roll Diameter |
50inches (1270mm) |
|
Maximum Unwind Roll Weight |
3300lbs (1500kg) |
|
Minimum Rewind Diameter (smaller rewind diameter available) |
|
|
Maximum Rewind Diameter |
|
|
Minimum Rewind Shaft O.D. |
|
|
Maximum Rewind Core O.D. |
Send product request
Other supplier products
 |
Boarding Pass Paper Case Packer | Description Standard Specifications(custom sizes are available) Tap I.D. 3inches (76mm) Tap O.D. 11inches (280mm) ... |
 |
GPPE Fully-automatic POS/ATM Paper Surface Rewinder | Automation Cores are automatically fed into a sorting unit where they are aligned and staged in the autoloader, and put on the core shaft. Core s... |
 |
GPPE Label Stock Roll Off-line Die Cutting Machine | Description Because of the high volume of rolls produced on GPPE’s rewinders, a roll processing line is offered to minimize downstream lab... |
 |
Label Stock Manual Surface Rewinder | Operator Responsibilities Each Cycle The operator is responsible for loading cores, placing the mandrel into the rewinding station, cutting the t... |
 |
POS/ATM Paper Flow Pack Wrapper | The PB460 flow pack wrapper is a high-volume flow pack system that provides rapid packaging of POS and similar rolls. The flow pack wrapping machi... |
