1050D Automatic Deep Embossing Die Cutting Machine
We designed 1050D Automatic Deep Embossing Die Cutting Machine, which is the greatest research and development and manufacturing of new equipment with a higher degree of intelligence.
This automatic cardboard embossing machineadopts numerous advanced pneumatic and servo driving processing technology from abroad. After the strict assembly quality control, the embossing roller machine has the advantage of simple operation and safe reliability.
The automatic embosser could deep embossing, creasing and die cutting after printing products, such as more than 80g/m2 paper, cardboard, corrugated paper below 4mm, pasting paper, laminating paper and so on.
Good quality and design make cardboard paper cutter embossing machine work stably and safety when machine's speed reaches 7500 sheets/h. This roll embossing machinewill provide you to enjoy a comfortable operation and a faster return on investment.
Features of 1050D Automatic Deep Embossing Die Cutting Machine
Deep Embossing/Die Cutting Part
12 heated temperature areas are in the die-cutting platform. They have a timing pneumatic temperature controller function, and each area can be controlled separately. It adopts hot embossing, hot bumps, hot indentation and so on. Hot press honeycomb is made by high strength heat-resistant material, it will be not transformation in high temperature. Hot press honeycomb knife and die cutting knife could be changed, so it achieves the switch of hot press function and die cutting function.
Thicken Wall
Thicken wall could stress-tolerant 1000 ton, the embossing is clearer, the effect is better.
The whole wall of this visiting and greeting card embossing machine is made of nodular cast iron, which is better than regular steel.
12 Temperature Control Section
The 12 independent heating areas are controlled by a PID system, which was researched by our department. This system of paper cutting embossing machinecould control the temperature stably, ensure the temperature is uniform in the whole heating system, quick response, it could adapt complex electrochemical aluminum transfer effect.
Delivery Section
Delivery section add tester into security system. It is equipped with inset counter. Using subsection could adjust brush and sheet air-blowing device, so the finished product of delivery section could product stably. Gripper drive train expanded buffer device.
Feeder/Feeding Section
The design of stacker preparatory stage was improved, it could use prepared car sheet piling. Also could use ordinary hydraulic car sheet piling to stacker directly. The machine has four suction nozzles and four sending nozzles in feeder, ensure feed smoothly. Adopt import screw air-blowing device, the scrapbook embosser machine for papercould make the sheet send smoothly.
Feeding Positioning Section
The incline-type paper moving table top is more suitable to high-speed thin paper and location. Side location adopt dual purpose side device with pull guide and push guide, accounting to paper choose, it makes switching easier. It could switch front rise position arriving reduction of speed device, it is benefit of thin paper's location.
Specification of 1050D Automatic Deep Embossing Die Cutting Machine
Machine Parameters:
|
Model |
1050D |
|
Name |
Automatic Deep Embossing Die Cutting Machine |
|
1050×750mm |
|
|
400×360mm |
|
|
1040×720mm |
|
Inner Chase Size |
1080×745mm |
|
Die Cutting Steel Plate Size |
1080×736mm |
|
Paper Thickness |
80-2000 g/m² Cardboard |
|
Corrugated paper≤4mm |
|
|
8mm |
|
Plastic Range |
|
|
7500 sheets/h |
|
|
580T |
|
|
1350mm |
|
|
1200mm |
|
|
Total Weight |
|
|
Dimensions |
6300×4200×2100mm |
|
Heating system |
12 heating areas, 0°C-200°C adjustable |
|
Total Power |
20kw |
|
Full Load Power |
42kw |
|
Voltage Requirements |
380V 50Hz |
|
Air compressor |
The material of machine: Ductile iron (Nodular cast iron)
|
Configuration of Die Cutting Machine |
|||
|
1050E/ES/D/DS/F/EF/FH |
|||
|
Accessory |
Brand |
Place of Origin |
|
|
1 |
Photoelectric Switch |
SUNX |
Japan |
|
2 |
HMI |
WEINVIEW |
Taiwan |
|
3 |
Button |
SCHNEIDER |
France |
|
4 |
SIEMENS |
Germany |
|
|
5 |
Solid State Relay |
FOTEK |
Taiwan |
|
6 |
PLC |
MITSUBISHI/PANASONIC |
Japan |
|
7 |
Electric Horn |
QLIGHT |
Korea |
|
8 |
Magnetic Valve |
SMC |
Japan |
|
9 |
Oil-water Separator |
AIRTAC |
Taiwan |
|
10 |
Motor Breaker |
SIEMENS |
Germany |
|
11 |
Servo Motor(Foil stamping) |
YASKAWA |
Japan |
|
12 |
Main Motor |
TECO |
Taiwan |
|
13 |
Gear Motor |
CPG |
Taiwan |
|
14 |
Oil Pressure Switch |
ARK |
Korea |
|
15 |
Pneumatic Clutch |
OMPI |
Italy |
|
16 |
Paper Feed Clutch |
MIKIPULLEY/OGURA |
Japan |
|
17 |
Torque Limiter |
JASU |
Taiwan |
|
18 |
Indexing Drives |
TAN TZU |
Taiwan |
|
19 |
Vacuum Pump |
BECKER |
Germany |
|
20 |
Feeder |
YONGCHUAN |
Taiwan |
|
21 |
Feeder Nozzle |
SILENT |
Sweden |
|
22 |
Tooth Row Drive Chain |
RENOLD |
Britain |
|
23 |
Other Drive Chain |
TYC |
Taiwan |
|
24 |
Tooth Row |
JASU |
Taiwan |
|
25 |
Bearing |
FALA/IKO |
Germany/Japan |
|
26 |
Rotary Joints |
DEUBLIN |
America |
|
27 |
Timing Belt |
OPTIBELT |
Germany |
|
28 |
Paper Feed Belt |
CODONBELT |
Switzerland |
|
29 |
Mould Coil Spring |
TOHATSU |
Japan |
|
30 |
Worm&Worm Wheel |
LIMING |
Taiwan |
|
31 |
Oil Temp.Conditioning System |
WLP |
Taiwan |
|
32 |
Cooling Fan |
SUNON |
Taiwan |
|
33 |
Heat Exchanger |
LEINIX |
America |
|
34 |
Lubrication Pump |
YONGSHENG |
Taiwan |
|
35 |
Encoder |
OMRON |
Japan |
|
36 |
Sealing Ring |
CTY |
Germany |
|
37 |
Frequency Converter |
YASKAWA |
Japan |
|
38 |
Body Material |
Ductile Iron QT600-3 |
|
Note：the accessories of machines can be changed in the process of upgrading, with no less than the existing brand quality, the seller will reserve the right, no longer separate notification.
Highlights of 1050D Automatic Deep Embossing Die Cutting Machine
01
Pneumatic Clutch
The high quality pneumatic clutch reduces noise and minimizes impact when stopping the embosser tipper machineat a high speed.
02
Gripper and Chain
The grippers of electric embossing machines for card making are made of special extra hard aluminium alloy, with anode treatment on the surface, ensuring accurate die-cutting and embossing, etc. at high speed. The adjustment mechanism, the patent design guarantees control accuracy. An imported chain is used for the main gripper transmission, with strength increased by 45% for accurate stability and prolonged life.
03
Lubrication System
With a programmable lubrication system, the accurate control of PLC ensures balanced lubrication of the embossing machine for card making.
04
Air Pump
Adopting imported equipment, improving the stability of the embosser machine for paper, low noise, high performance, long service life.
Now the price of pvc card embossing machine for saleis low, if you have needs, please contact us.
As one of packaging machinery suppliers, we will do our best to meet all the needs of customers.
Send product request
Other supplier products
 |
Folder Gluer Machine | BoxFolder Gluer Machine Growing has been devoting itself to the technical creation and reliable design of folding and glueing with the spirit of p... |
 |
Post-press Machine for Food & Beverages | For food and beverage, conversion requirements are very high, no matter what size boxes are required high quality.The GROWING die cutting machine h... |
 |
Square Botton Paper Bag Machine | This square bottom paper bag machineis used for making paper bags automatically from unbleached paper or printed paper roll, such as Kraft paper, f... |
 |
Post-press Machine for Food & Beverages | For food and beverage, conversion requirements are very high, no matter what size boxes are required high quality.The GROWING die cutting machine h... |
 |
Automatic Die-Cutting Machine | Automatic die cutting machine for boxesmeets the various requests of the printing and packing market. This auto carton box die cutting machinead... |
