hybrid vertical injection molding machine DV-1600S

Produced by: Hangzhou Denice Machinery Co.,Ltd

All supplier products

If You Have Any Question On Hybrid Vertical Injection Moulding Machine, , We Will Give The Professional Answers To Your Short Questions.

Single Slide Table Style of DV-S Series:

* Vertical four column clamping, vertical injection, ease to put and take out inserts.

* Single slide design, item put and take out of the work area, which shares ease operate, high safety character.

* Four column single slide table machine (1 upper mold, 1 bottom mold)

We are .

Specification
Model		Unit	DV-1200S
(InjectionUnit)	Screw diameter	mm	Ф46	Ф52
	Maximum injection pressure	Kg/cm2	2193	1716
	Theoretical shot volume	cm3	365	467
	Maximum shot weight（PS）	g/Oz	325（11.4）	415（14.6）
	Injection rate	cm3/sec	123	157
(ClampingUnit)	Clamping force	ton	120
	Sliding Table size	mm	590×700
	Sliding Table Stroke	mm	760
	tie bar distance	mm	600×400
	Minimum mold thickness	mm	200/300（Can be customized according to customer requirements）
	Opening stroke	mm	300
	Open daylight	mm	500/600（As required）
	Ejector force	T	（Can be customized according to customer requirements）
	Ejector stroke	mm	73
(Others)	Pump motor power	Kw	15
	Hydraulic system pressure	Kg/cm2	140
	Barrel heating power	Kw	7
	Total wattage	Kw	22
	Oil tank capacity	L	400
	Machine weight (approx.)	T
	Machine dimensions(approx.)	m

Specification
Model		Unit	DV-1600S
(InjectionUnit)	Screw diameter	mm	Ф50	Ф55
	Maximum injection pressure	Kg/cm2	1856	1534
	Theoretical shot volume	cm3	471	570
	Maximum shot weight（PS）	g/Oz	420（14.8）	509（17.9）
	Injection rate	cm3/sec	157	190
(ClampingUnit)	Clamping force	ton	167
	Sliding Table size	mm	640× 800
	Sliding Table Stroke	mm	800
	tie bar distance	mm	660× 630
	Minimum mold thickness	mm	250/350（Can be customized according to customer requirements）
	Opening stroke	mm	300
	Open daylight	mm	550/650（As required）
	Ejector force	T	（Can be customized according to customer requirements）
	Ejector stroke	mm	115
(Others)	Pump motor power	Kw
	Hydraulic system pressure	Kg/cm2	140
	Barrel heating power	Kw
	Total wattage	Kw
	Oil tank capacity	L	650
	Machine weight (approx.)	T
	Machine dimensions(approx.)	m

Specification
Model		Unit	DV-2100S
(InjectionUnit)	Screw diameter	mm	Ф55	Ф60
	Maximum injection pressure	Kg/cm2	1749	1470
	Theoretical shot volume	cm3	570	678
	Maximum shot weight（PS）	g/Oz	509（17.9）	605（21.3）
	Injection rate	cm3/sec	180	215
(ClampingUnit)	Clamping force	ton	210
	Sliding Table size	mm	695× 950
	Sliding Table Stroke	mm	950
	tie bar distance	mm	880×660
	Minimum mold thickness	mm	350/450（Can be customized according to customer requirements）
	Opening stroke	mm	400
	Open daylight	mm	800/900（As required）
	Ejector force	T	7（Can be customized according to customer requirements）
	Ejector stroke	mm	100
(Others)	Pump motor power	Kw	22
	Hydraulic system pressure	Kg/cm2	140
	Barrel heating power	Kw
	Total wattage	Kw
	Oil tank capacity	L	750
	Machine weight (approx.)	T
	Machine dimensions(approx.)	m

Specification
Model		Unit	DV-2500S
(InjectionUnit)	Screw diameter	mm	Ф60	Ф65
	Maximum injection pressure	Kg/cm2	1588	1353
	Theoretical shot volume	cm3	706	829
	Maximum shot weight（PS）	g/Oz	630（22.2）	740（26）
	Injection rate	cm3/sec	189	221
(ClampingUnit)	Clamping force	ton	250
	Sliding Table size	mm	930×1050
	Sliding Table Stroke	mm	1100
	tie bar distance	mm	950×700
	Minimum mold thickness	mm	350/450（Can be customized according to customer requirements）
	Opening stroke	mm	450
	Open daylight	mm	800/900（As required）
	Ejector force	T	7（Can be customized according to customer requirements）
	Ejector stroke	mm	145
(Others)	Pump motor power	Kw	22
	Hydraulic system pressure	Kg/cm2	140
	Barrel heating power	Kw
	Total wattage	Kw
	Oil tank capacity	L	850
	Machine weight (approx.)	T
	Machine dimensions(approx.)	m

Specification
Model		Unit	DV-3000S
(InjectionUnit)	Screw diameter	mm	Ф65	Ф75
	Maximum injection pressure	Kg/cm2	1590	1194
	Theoretical shot volume	cm3	928	1077
	Maximum shot weight（PS）	g/Oz	829（29.2）	961（33.8）
	Injection rate	cm3/sec
(ClampingUnit)	Clamping force	ton	300
	Sliding Table size	mm	1070×1250
	Sliding Table Stroke	mm	1250
	tie bar distance	mm	1100×850
	Minimum mold thickness	mm	450/550（Can be customized according to customer requirements）
	Opening stroke	mm	450
	Open daylight	mm	900/1000（As required）
	Ejector force	T	8（Can be customized according to customer requirements）
	Ejector stroke	mm	165
(Others)	Pump motor power	Kw	30
	Hydraulic system pressure	Kg/cm2	140
	Barrel heating power	Kw
	Total wattage	Kw
	Oil tank capacity	L	1000
	Machine weight (approx.)	T
	Machine dimensions(approx.)	m

Specification
Model		Unit	DV-3500S
(InjectionUnit)	Screw diameter	mm	Ф65	Ф75
	Maximum injection pressure	Kg/cm2	1590	1194
	Theoretical shot volume	cm3	928	1077
	Maximum shot weight（PS）	g/Oz	829（29.2）	961（33.8）
	Injection rate	cm3/sec
(ClampingUnit)	Clamping force	ton	350
	Sliding Table size	mm	1070×1250
	Sliding Table Stroke	mm	1250
	tie bar distance	mm	1100×850
	Minimum mold thickness	mm	450/550（Can be customized according to customer requirements）
	Opening stroke	mm	450
	Open daylight	mm	900/1000（As required）
	Ejector force	T	8（Can be customized according to customer requirements）
	Ejector stroke	mm	165
(Others)	Pump motor power	Kw	37
	Hydraulic system pressure	Kg/cm2	140
	Barrel heating power	Kw
	Total wattage	Kw
	Oil tank capacity	L	1100
	Machine weight (approx.)	T
	Machine dimensions(approx.)	m

Specification
Model		Unit	DV-4500S
(InjectionUnit)	Screw diameter	mm	Ф65	Ф75
	Maximum injection pressure	Kg/cm2	1590	1194
	Theoretical shot volume	cm3	928	1077
	Maximum shot weight（PS）	g/Oz	829（29.2）	961（33.8）
	Injection rate	cm3/sec
(ClampingUnit)	Clamping force	ton	450
	Sliding Table size	mm	1260×1600
	Sliding Table Stroke	mm	1600
	tie bar distance	mm	1300×1050
	Minimum mold thickness	mm	450/550（Can be customized according to customer requirements）
	Opening stroke	mm	450
	Open daylight	mm	900/1000（As required）
	Ejector force	T	8（Can be customized according to customer requirements）
	Ejector stroke	mm	200
(Others)	Pump motor power	Kw	30+37
	Hydraulic system pressure	Kg/cm2	140
	Barrel heating power	Kw
	Total wattage	Kw
	Oil tank capacity	L	1400
	Machine weight (approx.)	T
	Machine dimensions(approx.)	m

More information please click .

Send product request

	hybrid vertical injection molding machine DV-1600.2R.CE	The CE series DENICE: approved by the European Union, equipment collectionarea is designed with ergonomic design. The safety protection devices i...
	plug making machine DC-450	* Vertical clamping, horizontal injection, ease to put and take out items. · * No column, three sides open, tending to produce long pla...
	rotary table injection molding machine DC-450.2R	·Clamping force : 45Ton-120Ton ·Injection weight : 97-415g ·Vertical clamping and horizontal injection design ·Rigid C...
	hybrid vertical injection molding machine DV-1600S	If You Have Any Question On Hybrid Vertical Injection Moulding Machine, , We Will Give The Professional Answers To Your Short Questions. Single...
	thermosetting injetion molding machine DK-2100S	· DK Series · Vertical type four column clamping, horizontal injection, convenient to put and take out the items. · Strong me...

Silicone Rubber Injection Molding	Seller: Packson Mold Co.,Ltd	Packson's state-of-the-art facilities consist of a 1000㎡ certified clean room, which is equipped ...
Prototype Injection Mould	Seller: Packson Mold Co.,Ltd	Packsonmold is a company that provides high-quality prototype services, including 3D printing, CN...
Precision Injection Molding	Seller: Packson Mold Co.,Ltd	At Packson, we specialize in manufacturing custom precision mold partsand machined parts that mee...
Overmolding Injection Molding	Seller: Packson Mold Co.,Ltd	Overmoldingmold is made of overmolding injection molding processwhich is a special injection mold...
Multi-cavities Injection Molding	Seller: Packson Mold Co.,Ltd	Multi cavity mouldis an injection mold that has more than one cavity. The shape of each cavity is...