rubber plastic kneading machine
1. the roller is made of cold-hard alloyed ingot iron.
2.it is easy and safe operate.
3. the machine main uses are following in rubber product,factory:natural rubber refining, raw rubber and compound mixing, rubber beating mixing and rubber tab letting.
4.this machine is double roller opening to be used for rubber mixing, it consists of seat. Frame, rubber driving device, lubricator and cooler, range adjusting device of roller, safety brake, motor and reducer, etc.
5.the roller is made from safety cooled and hard cast steel, smooth surface is polished.In term of different case, saturated steam and cooling water can be inputted in the empty roller to adjust speed of roller.Colloidal particles are drawn into the gap of the two rollers which make relativ rotation in different velocity to mix rubber.
Send product request
Other supplier products
Frame Type Plate Vulcanizer | Frame Type Plate Vulcanizer is used for pressing rubber products ad thermosetting plastic products, also and be used for seals. project rubber and ... | |
Open Type Rubber Mixing Mill | 1).The chill cast shell and the inner part of the roll can be poured separately. Thus different composition of iron for the shell and for the inner... | |
Large Plate Vulcanizer | 1)The machine is in frame structure with below pressing form (upwards). 2)Under the working hydraulic pressure, the embolism ascends to make hot pl... | |
waste tyre recycling line | This production is used for recycle waste tires (600mm-1200mm) to make rubber particle or rubber powder. The size of final particle is from 5 meshe... | |
rubber plastic kneading machine | 1. the roller is made of cold-hard alloyed ingot iron. 2.it is easy and safe operate. 3. the machine main uses are following in rubber product,fac... |
Same products
JYYJ-H-V6 polyurethane foam spraying machine | Seller: 824810 | -Voltage:380V 50HZ -Heating Power:22KW-26KW -OUTPUT:2-10kg/Min -MAX OUTPUT (Mpa):36Mpa -Matri... | |
JYYJ-Q200D polyurethane foam spraying machine | Seller: 824810 | -Voltage:380V 50HZ -Heating Power:11KW -OUTPUT:2-10kg/Min -MAX OUTPUT (Mpa):25Mpa -Matrial A:... | |
Pentamethylene High Pressure PU Foam Machine /High Pressure Cyclopentane Polyurethane Machine | Seller: 824810 | Features:1. The metering is accurate, and the high-precision metering device is adopted, and the ... | |
High pressure polyurethane foam injection machine | Seller: 824810 | Product Features of High Pressure PU Machine:1. Material injection mixing head can freely move fo... | |
2 part resin bonding and sealing, potting, gasket, form-in-place gasket (FIPG) thermal gap filling machine | Seller: 824810 | FeaturesIndependent development 5-Axis Linkage PCB boards, help produce various shapes product su... |