Electronic Potting Silicone Rubber

• 

1.the feature of HY 9055
HY 9055 silicone rubber is a kind of low viscosity, Inherent flame resistance, two components addtion cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. It mainly applied in electronic components surface with materials of PC(Poly-carbonate)???PP???ABS???PVC, etc. and metal materials..

2.Typical Applicationof Electronic Potting Silicone Rubber

HY 9055 electronic potting silicone rubber could be applied to

- high powered electronics,

- DC/DC module and circuit board which requires heat dissipation and high temperature resistance. -It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.

3.TechnicalGuidelines of of Electronic Potting Silicone Rubber

a, Pls put part A and part B in separate container and stir evenly before mixing the two part together.

b, Mixing Ratio: part A: part B = 1:1

c, Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.Then the mixture could be used for pouring.Note:The thickness of the silicone affects the curing time. If the silicone used is a little thick,then the curing time will be a little longer.The temperature also affects the curing time.When in lower temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. With temperature of 80???100℃, the silicone will cure in 15 minutes; while in 25℃ room temperature, the silicone will cure around 8 hours.


4.Notesof Electronic Potting Silicone Rubber

a.The following material may hinder the curing of HY 9055, So pls use after the test. When necessary, pls clean the application areas.

Organotin compound or Condensation silicone with organotin

Sulphur, sulfide and sulfur rubber materials.

Amine compounds as well as contains the amine materials.

Pewters solder flux

b. HY 9055 should be sealed storage.The mixture should be used up disposably to avoid causing waste.

c. HY 9055 belongs to non-dangerous goods, but keep away from mouth and eyes.

d. When it gets stratified after a period of storage, Please mix it evenly before using,which does not affect the performance.

Other supplier products

	PCB Electronic Potting Silicone	1.Application: -Applying for the surface of PC,PP,ABS,PVC,metal ...
	Platinum Cure Molding Rubber Silicone RTV	Application:Platinum cure molding rubber silicone rtv is used for prototyping and the reproduction of parts. Silicone moulds can be constructed in ...
	Electronic Potting Silicone Rubber	1.the feature of HY 9055 HY 9055 silicone rubber is a kind of low viscosity, Inherent flame resistance, two components addtion cured potting silic...
	RTV silicone rubber for artificial stone molding	1. RTV Silicone Rubber for Artificial Stone Molding- Description: E-640 is very suitable for making silicone rubber stone molds. It is featured wi...
	pad printing silicon	1.Applications of liquid pad printing silicone rubber Pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, ...

Same products

	Rubber O-Ring S7A7413(Can Be Used For Aerospace Equipment Parts)	Seller: Cixi Changhe xinqide seal factory	Main material：NBR,Silicone，EPDM,FKM Colour： A variety of colors, can be customized Size： Variou...
	HY-9055 of Electronic Potting Silicone Rubber	Seller: Shenzhen Hong Ye Jie Technology Co., Ltd.
	Product Feature of Electronic Potting Silicone Rubber Electronic Potting Silicone Rubber	Seller: Shenzhen Hong Ye Jie Technology Co., Ltd.
	Screw barrel for Rubber Extruder Machine	Seller: Ningbo Tianze Machinery Technology Co.,Ltd	Over 29 years in Screw and Barrel line , your inquiry pls find sales(at)tizatech .com , we will b...
	Power pressure washer hose	Seller: Shandong Focus Hose Co., Ltd.	SAE 100R1AT/EN 853 1SN 2SN hydraulic hoseDIN EN856 4SP 4SH hydraulic hoseSAE 100R12 100R13 100R15...