IEC 60068-2-52, ASTM-B368, MIL-STD-202, EIA-364-26, ASTM-B117 Salt Spray Test Chamber
IEC 60068-2-52,Website:, ASTM-B368, MIL-STD-202, EIA-364-26, ASTM-B117 Salt Spray Test Chamber The Salt Spray Test Chamber is applicable to the salt spray corrosive test for the protection layer of components, parts, electronic and electrical parts and metal materials and industrial products. ModelWork Room Size (mm)Exterior Size (mm)VoltagePower (KW)YWX/Q-150590x470x4001070x800x10501Phase/220V2.5YWX/Q-2501000x640x5001400x870x11501Phase/220V3.5YWX/Q-7501100x750x5001680x1030x12601Phase/220V4.5YWX/Q-0101300x1000x6002000x1160x13901Phase/220V6.5YWX/Q-0161600x900x7202320x1280x15001Phase/220V9.5YWX/Q-0202000x1000x8002530x1220x14101Phase/220V11Specifications: • The Salt Spray Test Machine is made of transparent materials so that the operator can see the tested sample in it and the spraying situation of the tested sample.
• A waterproof structure is adopted between the chamber cover and chamber body, thus there is no salt spray overflow.
• Adopts the tower spraying system and equipped with the salt solution filter system and non-crystal nozzle so as to realize even salt spray distribution and freely adjustable settlement.
• It meets the following standards: IECGB/T2423.17), GB/T10125, ISO9227, ASTM-B117, GB/T2423-18, IEC 60068-2-52, ASTM-B368, MIL-STD-202, EIA-364-26, ASTM-B117, GJB150, DIN50021-75, ISO3768, 3769, 3770; CNS 3627, 3885, 4159, 7669 etc.
Other supplier products
|
|
IEC 62471 LED Radiation Safety Test |
IEC 62471 LED Radiation Safety Test IECCIE S009) Photobiological Safety of Lamps and Lamp System and IEC TR Guidance on Manufacturing Requirements ... |
|
|
IEC 60695-2-20 Hot Wire Ignition Test Apparatus |
IEC 60695-2-20 Hot Wire Ignition Test Apparatus Hot wire ignition tester is according to the standard requirement of IEC60695-2-20 and GB4943,Websi... |
|
|
IEC60695-2-1, IEC60695-2-10~IEC60695-2-13 Glow-wire Test Apparatus |
IEC60695-2-1,Website:, IEC60695-2-10~IEC60695-2-13 Glow-wire Test Apparatus Glow-wire Test Apparatus is according to IEC60695-2-1, IEC60695-2-10~I... |
|
|
Lamp Start, Run-up Time And LED Flicker Test |
Lamp Start,Website:, Run-up time and LED Flicker Test Dated 14th December, 2012, the EU officially released the (EU) NO 1194/2012rules.Compared wit... |
|
|
Luminous Flux, CCT, CRI LED Light Tester System |
Luminous Flux,Website:, CCT, CRI LED Light Tester System LPCE-3 is a Luminous Flux, CCT, CRI LED Light Tester System. It is suitable for photometri... |
All supplier products
Same products
