WDW-100 electronic universal material testing machine

• 

This product is suitable for testing and analyzing the mechanical properties of various metals, non-metals and composite materials, and can obtain test data such as maximum test force value, fracture force value, yield strength, upper and lower yield strength, tensile strength, compressive strength, elongation at break, tensile modulus of elasticity and bending modulus of elasticity of test materials.

Features:

1.Safety position and experimental position height arbitrary lock. 2.Automatic protection when exceeding the maximum load,software limit and electronic limit double protection

Main technical parameters and specifications:

Maximum test force: 100KN

Accuracy grade: 1 grade (can be customized to 0.5 grade on request)

Test force measurement range: 1% to 100% FS throughout the whole process without sub-grade

Relative error of the test force value: ±1% or less

Test force resolution: 1/±300000 of the maximum test force throughout the resolution remains unchanged

Deformation measurement range: 0.2%～100%FS

Relative error of deformation value: within ±0.5% of the indicated value

Deformation resolution: 1/±300000 of the maximum deformation

Relative error of displacement value: within ±0.5% of the displayed value

Displacement resolution: 0.025µm

Force control rate adjustment range: 0.01~5%FS/S

Relative error of force-controlled rate: within ±1% of the set value

Deformation rate adjustment range: 0.02~5%FS/S

Relative error of deformation control rate: within ±1% of the set value

Cross-beam speed adjustment range: 0.01～500mm/min

Control range of constant force, constant deformation and constant displacement: 0.5%～100%FS

Control accuracy of constant force, constant deformation and constant displacement: within ±1% of the set value when the set value is <10%FS; within ±0.1% of the set value when the set value is ≥10%FS

Effective tensile space (without fixture): 800mm

Effective test width: 400mm Host size: 1000 × 800 × 2200 (mm)

Power supply: 220V±10%, 2000W

Host weight: about 800kg

Other supplier products

	FBT-9 Automatic Specific Surface Area Meter	This product is suitable for measuring the surface area per gram of solid material. The product complies with GB8074-2008 standard. Main technical...
	CCB-70A Concrete Carbonation Test Chamber	Our company participated in the drafting of CCB-70A concrete carbonization test chamber and designated by the Building Materials Department.This eq...
	HP-4.0 Concrete Impermeability Apparatus	HP-4.0 automatic pressure regulating concrete impermeability instrument is used to measure the impermeability of concrete,which is used in construc...
	TSY-2000A constant loading pressure testing machine (large frame) Jinhua type	This product is suitable for the compressive strength test of brick, stone, cement, concrete and other materials, and can also be used for the comp...
	HG-80 Concrete Penetration Resistance Tester	This product is suitable for testing the setting time of various cements, admixtures and concrete mixtures with different concrete mix ratios under...

Same products

	WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android	Seller: China PHONEFIX Technology Co., Ltd	WYLIE WL-155 SIM Card Tester is used to detect SIM card circuits and supports dual-SIM detection ...
	HCV1500 High-precision Voltage Sensor	Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd	HCV1500 high-precision voltage sensor is a voltage sensor that can measure DC, AC, pulse and vari...
	Xenon Test Chamber	Seller: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Seller: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Seller: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...