YAW-300.10S constant load cement flexural and compressive testing machine
YAW-300·10S Constant Load Cement Flexural and Compressive Testing Machine is a new generation of servo press independently developed and produced by Zhejiang Luda. With strong technology and production capacity, our company was honored to be invited to participate in the preparation of new standards for all-in-one machines. This testing machine is an essential testing instrument for building materials, construction engineering, quality supervision, metrology testing, scientific research institutions and other units.
The product complies with the specific provisions of the testing machine in GB/T17671-2021, JC/T960-2020, and JC/T724 standards.
Features:
1. The whole machine adopts physical and chemical board countertop, and the frame adopts static surface electroplating, which is easy to clean and beautiful.
2. The anti-bending part adopts electric oil cylinder, which has high precision, stable control, accurate displacement and force value.
3. The sensor adopts the spoke sensor, which has high precision, stable speed and reciprocation.
4. Servo motor system, the whole process is silent, low decibel, the oil temperature is not easy to rise, high efficiency and stability, the voltage adopts single-phase 220V, strong versatility, high efficiency and energy saving.
5. The protective cover is made of acrylic transparent material, which is clean and beautiful, and the test process can be observed throughout the process.
6. The 40mmx40mm cement compression fixture is made of fully galvanized material.
Main technical parameters and specifications:
Compressive strength test
Maximum test force kN 300
Constant loading rate kN/s 0.3~9.9
Upper and lower platen spacing mm 185
Pressure plate diameter mm Φ120
Piston maximum stroke mm 90
Flexural strength test
Maximum test force kN 10
Constant loading rate kN 0.05
Section side length mm 40
Span between supports mm 100
Piston maximum stroke mm 45
Indication relative error (accuracy) ±0.5%
Indication repeatability relative error 0.5%
Return to zero relative error ±0.1%
The relative resolution of the force value display device of the test machine is 0.5%
Zero drift ≤±0.1%
Servo motor power single phase 1500W
Power supply 220V (±10%)
Dimensions mm 1300×480×1340
Machine weight Kg 500
Send product request
Other supplier products
 |
WDW-S05 electronic universal material testing machine | This product is suitable for testing and analyzing the mechanical properties of various metals, non-metals and composite materials, and can obtain ... |
 |
HBY-60 constant temperature water curing box (horizontal) | This type of water curing tank is designed and manufactured according to the maintenance requirements of the industry standards of the People's Rep... |
 |
WAW-100B electro-hydraulic servo universal material testing machine | This product is suitable for metal, non-metal and composite materials, components of tensile, compression, bending, shear and other mechanical prop... |
 |
YAW-300 Electro-hydraulic flexural and compressive testing machine | This product is suitable for the compressive strength test of brick, stone, cement, concrete and other materials, and can also be used for the comp... |
 |
HZJ-0.5 Concrete Vibrator | This product is suitable for the laboratory on-site construction site as a test piece forming and the prefabricated component factory to vibrate va... |
Same products
 |
FNAC-28 2 IN 1 Type-C USB Tester Voltage Current Power Meter | Seller: Phonefix | FNIRSI FNAC-28 Multifunctional 2 in 1 Type-C USB Tester Digital Voltmeter Ammeter Amperimetor Vol... |
 |
WF-EDU-02 Motor & Propeller Test Kit | Seller: Wing Flying Technologies Co., Ltd | WF-EDU-02 Motor & Propeller Test Kit Product Description Motor & Propeller Test Kitsare... |
 |
WF-EDU-01 Motor and Propeller Test Kit | Seller: Wing Flying Technologies Co., Ltd | WF-EDU-01 Motor and Propeller Test Kit Product Description Suggested Propulsion system ... |
 |
WF-EN-50 Engine Test Bench | Seller: Wing Flying Technologies Co., Ltd | Suggested Engine 110cc-350cc Engine Max Hanging Type Engine 20kg ... |
 |
WF-EN-15 Engine Test Bench | Seller: Wing Flying Technologies Co., Ltd | WF-EN-15 Engine Test Bench Product Description Suggested Engine 110cc Engine ... |
