Salt Mist Test Chamber(Salt /Temperature /Humidity)

• 

申请
该复合循环腐蚀试验室可进行传统的盐喷、干湿交替混合盐喷试验以及大多数汽车循环腐蚀试验。它是专门设计和装配的,以满足控制标准的要求,控制盐喷,相对湿度,空气干燥,凝结湿度,自动喷洒,盐水浸没,旋转喷洒,和低温。盐喷雾柜用于测试涂料涂装件、金属组件、电子组件、光电涂装件等。如果您需要更多关于我们测试设备的模型,请参考我们的测试室。新闻网

Feature
1.Structure of Salt Mist Test Chamber: with enclosure is a fully anti-corrosion structure, made of multi-layer fiberglass reinforced polyester resin, and constructed with corrosion-resistant materials.
2.Unique design: Large spraying area and high flow rate, resulting in shorter spraying time compared to fogging the solution under salt spray function.
3.Custom nozzle: Specific nozzles evenly spray the solution onto the test sample, and the solution flow rate can be adjusted.
4.The nozzle is installed on an independent module, making it easy to remove when fogging function is enabled.
5.Programmable touch screen controller allows for operation in both Chinese and English, and enables data collection.
6.Standard test specimen racks are provided, capable of accommodating flat samples. For oversized and heavy three-dimensional samples (such as automobile hubs and engine components), grid kits with the same height as the support can be used. The enclosure is structurally robust, allowing for even distribution of the load.
7.The spray on/off time can be programmed directly to better control the corrosion rate.

Meet standard:
DO160 E/F/GSalt spray test requirements
GB/T 20854-2007/ISO14993-2001
Accelerated testing of corrosion cycles of metals and alloys exposed to salt spray, "dry" and "wet" conditions
GB/T24195-2009/ISO 16151:2005Cyclic accelerated corrosion tests under acid salt spray, dry and wet conditions
GJB 150.11A-2009Military equipment laboratory environmental test method salt spray test
GB/T 2424.17-2008/IEC60068-2-11:1981 Salt spray test method
GB/T 2423.18-2012/IEC 60068-2-52: 1996Alternating salt spray test method for sodium chloride
GB/T 2423.3-2006/IEC Test cab: constant wet heat test method
GB/T 10125-2012/ISO9227-2006Corrosion test in artificial atmosphere salt spray test
巴林王国/吨31467.3-2015
电动车辆用锂离子电池组和系统
-第3部分:安全要求和试验方法:盐喷雾试验
ASTM B117,ASTM B368
GB/T10587-2006盐喷雾试验室技术条件
GB/T10586-2006湿热试验室技术条件
电气和电子产品环境测试设备的测试方法-盐喷雾测试设备

Other supplier products

	Temperature Humidity And Vibration Test Chamber	Application Temperature humidity and vibration test chamber conforms to the national standard and meets the specific test requirements.Through the ...
	Walk In Test Chamber For CATL Battery	CATL Battery Walk In Test Chamber JOEO Walk In Test Chamber's temperature cyclic stress screening is to change the external environmental stress by...
	High Altitude Chamber(altitude simulation chamber)	Application JOEO factoryaltitude simulation chamber is designed to allow users to perform temperature, humidity, and altitude condition tests in a...
	Head Expander For Shakers	Feature Dynamic performance is guaranteed through FEA and EMA tests Optional magnesium alloy or aluminum alloy The shape can be round, square, etc ...
	Three-Zone Thermal Test Chamber	Application Mainly used in aviation, aerospace, military units, electronics, IT industry and other test products in the surrounding atmospheric tem...

Same products

	FNAC-28 2 IN 1 Type-C USB Tester Voltage Current Power Meter	Seller: Phonefix	FNIRSI FNAC-28 Multifunctional 2 in 1 Type-C USB Tester Digital Voltmeter Ammeter Amperimetor Vol...
	WF-EDU-02 Motor & Propeller Test Kit	Seller: Wing Flying Technologies Co., Ltd	WF-EDU-02 Motor & Propeller Test Kit Product Description Motor & Propeller Test Kitsare...
	WF-EDU-01 Motor and Propeller Test Kit	Seller: Wing Flying Technologies Co., Ltd	WF-EDU-01 Motor and Propeller Test Kit Product Description Suggested Propulsion system ...
	WF-EN-50 Engine Test Bench	Seller: Wing Flying Technologies Co., Ltd	Suggested Engine 110cc-350cc Engine Max Hanging Type Engine 20kg ...
	WF-EN-15 Engine Test Bench	Seller: Wing Flying Technologies Co., Ltd	WF-EN-15 Engine Test Bench Product Description Suggested Engine 110cc Engine ...