Horizontal Thermal Test Chamber
Application
JOEO horizontal thermal test chamber is the best choice for batch testing and large test loads. The interior design is used for custom environmental stress screening of components and board level electronic components. The carrier basket transfers loads between hot and cold zones in two - or three-zone configurations, and is widely used in automotive, electronic and electrical, aerospace, communication equipment, medical equipment and other industries.If you need more models about our test equipment, please reference our chamber-testing（.）com
Meet Standards
IEC 60068-2-14 Nc - Rapid change of temperature, two-fluid-bath method
MIL-STD-883J Method 1011.9 - Military standard, test methods for microcircuits Thermal Shock
MIL-STD-202 Method 107 - Military standard, test methods for electronic and electrical component parts Thermal Shock
JESD22-A106B - Thermal Shock
IEC 60749-11 - Semiconductor devices, Mechanical and climatic test methods Part 11: Rapid change of temperature, Two-fluid-bath method
EIAJ ED-4701/307 - Environmental and endurance test methods for semiconductor devices Thermal Shock
Description
JOEO Horizontal thermal test chamber are available in a variety of configurations and are the right solution for all thermal shock test requirements for large or batch products.
Two zones, single capacity (-2)
(One hot zone and one cold zone)
The product in the test moves through a carrying basket, alternating between hot and cold zones.
Two-zone Dual Capacity (-2D)
(Two hot zones and one cold zone)
In a two-zone, two-capacity system, the cold zone is always in use, which helps to improve system efficiency.
Three zones, single capacity (-3)
(One hot zone, one normal zone and one cold zone)
In the horizontal three zones, the product moves through the carrier basket between the cold zone and the normal temperature zone, and the hot zone moves to surround the product basket.
Feature
The reference test load of the JOEO thermal test chamber is composed of 12 steel plates. Each pound of steel has an exposed surface area of 65 square inches. The test load is oriented in the product carrier, with the airflow parallel to the steel plate. The load is distributed between two product carriers.
The weight of any additional racks must be included in the test load shown above.
The capacity depends on the stability of the product at extreme temperatures before transfer. Do not use environment dwell time.
When assisted by liquid nitrogen, smaller mechanical refrigeration systems will maintain low temperatures. Liquid nitrogen is required to meet the recovery time.
For a liquid nitrogen only thermal chambers, the maximum load is liquid nitrogen cooling without mechanical cooling.
Use IC chip product loading to recover 9 point products in 15 minutes or less. The load is distributed between two product carriers.
Send product request
Other supplier products
 |
Walk In( ESS Chamber) Rapid Temperature Change Test Chamber | Application JOEO professional Walk In ess chambercontrolled environmental chambers temperature cyclic stress screening is to change the external en... |
 |
Sine Random Shock Vibration Shaker System ISO ASTM IEC Of Vibration Shaker System | 标准的 B/T31486-2015测试要求 UL1642:2012&l;锂电池标准; UL2054:2012&l;家用和商用电池&t; UN38.3(2012) 对于便携式密封二次电池及其制成的用于便携式应用的电池的安全要求第2部分:锂系统&t;如果您需要更... |
 |
Electric Constant Temperature Drying Oven | Description JOEO Electric constant temperature drying oven is also known as vacuum chambers,vacuum oven,vacuum dry oven.As the name suggests, it is... |
 |
High Low Test Temperature Humidity Chamber | Application JOEO temperature humidity chamberis used to simulate the combination of temperature and humidity of the product in a climatic environme... |
 |
Panelized Walk In Test Large Environmental Chamber | Application: From aerospace and avionics to refrigerators and automobiles, JOEO panelized large environmental chamber serve as testing grounds for ... |
Same products
 |
FNAC-28 2 IN 1 Type-C USB Tester Voltage Current Power Meter | Seller: Phonefix | FNIRSI FNAC-28 Multifunctional 2 in 1 Type-C USB Tester Digital Voltmeter Ammeter Amperimetor Vol... |
 |
WF-EDU-02 Motor & Propeller Test Kit | Seller: Wing Flying Technologies Co., Ltd | WF-EDU-02 Motor & Propeller Test Kit Product Description Motor & Propeller Test Kitsare... |
 |
WF-EDU-01 Motor and Propeller Test Kit | Seller: Wing Flying Technologies Co., Ltd | WF-EDU-01 Motor and Propeller Test Kit Product Description Suggested Propulsion system ... |
 |
WF-EN-50 Engine Test Bench | Seller: Wing Flying Technologies Co., Ltd | Suggested Engine 110cc-350cc Engine Max Hanging Type Engine 20kg ... |
 |
WF-EN-15 Engine Test Bench | Seller: Wing Flying Technologies Co., Ltd | WF-EN-15 Engine Test Bench Product Description Suggested Engine 110cc Engine ... |
