Customize Salt Spray Chamber -Large Salt Spray Corrosion Test Chamber

• 

Applicable Industry
JOEO Corrosion Test Chamber(SSTC) series of chambers are the industry’s most advanced, flexible and robust test chambers available anywhere in the world.If you need more models about our test equipment, please reference our chamber-testing（.）com

Salt spray corrosion test chamber can provide the user a wide range of controlled cycles to meet the greatest variety of Industry standard specifications.

Salt Fog Test DIN EN ISO 9227 – DIN 50 021
Condensed Water Test DIN EN ISO 6270-2 – DIN 50 017 and EN ISO 6988 – DIN 50 018
Standard Climate DIN 50 014, clause 5 ambient temperature

Structure
JOEO'ssalt spray chamber manufacturersadopts 5mm or 8mm imported gray and white impact resistant P.V.C board, with high temperature resistance up to 85℃ and corrosion resistance.
Support frame: ¢ 10MM fiberglass rod, corrosion resistant. The steel V-frame and the fiber rod angle are placed to ensure the specimen is inclined at 15-30 degrees.
Pressure barrel is welded seamlessly with 2.0mm SUS304 stainless steel plate

Salt spray corrosion test chamberwith color touch screen LCD controller, which can record the testing curves.
Program Group Capacity: 140Pattern (Group) 1400Step (above) each program can be set up to Repest 99 segment.
Each executive mode time can be arbitrarily set 0-999 hours, 59 minutes.
Each group can be arbitrarily set the cycle of 1-999 .
Has the power memory function, recovery after power continue to perform the not completed the test.
interface RS232 connect with computer.

Fields Testing Standards
GB/T 20854-2007 Dry and wet salt spray test
ISO14993-2001 Dry and wet salt spray test
GB/T 2423.17-1993 salt spray test
GB/T 2423.18-2000 salt spray test
GB/T 10125-1997 salt spray test
ASTM.B117-97 salt spray test
JIS H8502 salt spray test
IEC68-2-11 salt spray test
IEC68-2-52 1996 salt spray test
GB.10587-89 salt spray test
CNS.4158 salt spray test
CNS.4159 CASS Copper accelerated acid salt spray test
GB/T 12967.3-91 CASS Copper accelerated acid salt spray test

(1) The neutral salt spray test (NSS test) is the earliest and most widely used accelerated corrosion test method. It uses 5% sodium chloride salt water solution, and the PH value of the solution is adjusted to a neutral range (6.5 ~ 7.2) as a spray solution. The test temperature is 35℃, and the sedimentation rate of salt spray is required to be 1～2mL/80cm/h.

(2) Acetic acid salt spray test (ASS test) is developed on the basis of neutral salt spray test. It is to add some glacial acetic acid to the 5% sodium chloride solution, the pH value of the solution is reduced to about 3, the solution becomes acidic, and the salt mist formed finally becomes acidic from neutral salt mist. Its corrosion rate is about 3 times faster than the NSS test.

(3) The copper salt accelerated acetate spray test (CASS test) is a rapid salt spray corrosion test recently developed. The test temperature is 50℃. A small amount of copper salt-copper chloride is added to the salt solution to strongly induce corrosion. Its corrosion rate is about 8 times that of the NSS test.
Cooperation Customers Reference
JOEO salt spray chamber, salt spray tester testing products are standard in every major automobile manufacturer in North America. We are the leader in salt corrosion testing innovation and working with companies like the Daimler Group, Ford, GM, Honda, Hyundai, Nissan, and Toyota. JOEO Salt spray chamberservice customers included many auto related suppliers such as Delphi, Visteon, Siemens, Valeo, Magni, Henkel, Borg Warner etc.

Other supplier products

	Uv Test Chamber	Meet Standard UV aging chamber ISO 4892-1 Plastic-Methods of exposure to laboratory light sources ASTM G-151 Standard Test Method for non metallic ...
	IPX 3 4 Rain Test Chamber	Application JOEO rain testing equipment,water spray test chamber,ip test chamber,rain test chambers is used to test the rain proof and waterproof p...
	three Axis Vibration Test System	Application JOEO multi axis vibration test system can simulate various vibration modes, including sine wave, dynamic vibration, shock vibration, se...
	Vibration Test Machine 1kn to 70kn Electrodynamic Vibration Shaker(Air-Cooling Shaker)	乔奥电动动力振动器(空气冷却器有随机正弦力等级从1KN到70KN,最大有效载荷从70公斤到1000公斤。 所有的振动测试系统都可以安装在一个集成基座上,带有一个滑台,以满足客户对振动台测试的测试条件要求。 乔奥阿里测试还提供了旋转键解决方案,包括组合气候测试室,头膨胀器和固定装置满足您的测试...
	Salt Spray Test Machine- ISO 9227 SST Chamber	Applicable JOEO Salt Spray Test Machine heating adopts titanium alloy electric heating tube. It has high corrosion resistance and long service life...

Same products

	FNAC-28 2 IN 1 Type-C USB Tester Voltage Current Power Meter	Seller: Phonefix	FNIRSI FNAC-28 Multifunctional 2 in 1 Type-C USB Tester Digital Voltmeter Ammeter Amperimetor Vol...
	WF-EDU-02 Motor & Propeller Test Kit	Seller: Wing Flying Technologies Co., Ltd	WF-EDU-02 Motor & Propeller Test Kit Product Description Motor & Propeller Test Kitsare...
	WF-EDU-01 Motor and Propeller Test Kit	Seller: Wing Flying Technologies Co., Ltd	WF-EDU-01 Motor and Propeller Test Kit Product Description Suggested Propulsion system ...
	WF-EN-50 Engine Test Bench	Seller: Wing Flying Technologies Co., Ltd	Suggested Engine 110cc-350cc Engine Max Hanging Type Engine 20kg ...
	WF-EN-15 Engine Test Bench	Seller: Wing Flying Technologies Co., Ltd	WF-EN-15 Engine Test Bench Product Description Suggested Engine 110cc Engine ...