ESS Chambers-Temperature Humidity Chamber

• 

Application
JOEO ESS chambers are suitable for the whole product, parts and materials for high temperature, low temperature, high and low temperature circulating and temperature stress screening (ESS) test, and constant humidity and cyclic damp heat test.
This type of temperature humidity chamber mainly used to simulate the product in climate conditions, a temperature and humidity conditions or at ambient temperature and humidity conditions, detecting the product features and the adapt change ability.
It’s the aviation, automobiles, home appliances, research and other fields necessary test equipment.If you need more models about our test equipment, please reference our chamber-testing（.）com
Meet Standards
IEC 62133-2017
UL 1642
UN 38.3

Product Features
JOEO ESS chambers refers to the process of exposing a newly manufactured or repaired product or component (typically electronic) to stresses such as thermal cycling and vibration in order to force latent defects to manifest themselves by permanent or catastrophic failure during the screening process.
The surviving population, upon completion of screening, can be assumed to have higher reliability than a similar unscreened population.
Can set the temperature variable rate of the different stress screening
Can perform a rapid temperature change (ESS), condensation test, high temperature and humidity test, temperature and humidity cycling test, etc.
Meet requirements of stress screening test（ESS Test） for electronic equipment
Test methods:Switching temperature & average temperature
Support variety of stress screening (fast temperature change rate) 5deg C/min, 10deg C/min, 15deg C/min experimental conditions
Meet Standards for electronic equipment MIL-STD-2164, MIL-344A-4-16, MIL-2134A-19, NABMAT-9492, GJB-1032-90, GJB/Z34-5.1.6, IPC-9701....ETC.
Temperature humidity chamber have 2 test methods: ①temperature test ②average temperature test
With aluminum sheet test machine load capacity (non plastic load)
Single machine can perform fast temperature change (ESS), condensation test, high temperature and humidity test, temperature and humidity cycling test, etc.
Following sample load customized with a large ESS Chamber
Built in two-way USB2.0 portable storage interface (can copy the test curve and load the test program)
Complete real-time test curve analysis shows that no time limit
Can be integrated with the E management system to monitor the management system
Multi-language selection: Chinese, English multilingual language switching.

Other supplier products

	IEC UL UN38.3 Vibration Shaker Machine For Batteries/LED Testing Vibration Test Setup	IEC UL UN38.3 VIBRATION SHAKER MACHINE FOR BATTERIES/LED TESTING VIBRATION TEST SETUP IEC 60068 vibration test setup testing and applications in th...
	Temperature and Humidity Testing Chamber	申请 用JOOO湿度和温度室、温度循环室模拟产品在气候环境下的温度和湿度组合(高温和低温操作、储存、温度循环、高温和高湿度、低温和低湿度、露水测试等)。)。适合航空航天产品、信息电子仪器、材料、电气、电子产品、各种电子元件在高温和低温下测试其性能指标。 描述 JOEO Temperatu...
	Temperature Humidity And Vibration Test Chamber	Application Temperature humidity and vibration test chamber conforms to the national standard and meets the specific test requirements.Through the ...
	Ipx9k Rain Test Chamber Manufacturer	Application JOEO ipx9k water spray test chamber, ipx9k test chamber,rain test machine, rain testing equipment can be used to evaluate the waterproo...
	HVS10 Series Packaging Compression Tester	HVS10 Series Packaging Compression Tester is designed to evaluate the compressive strength of packagingin order to prevent the product from deformi...

Same products

	FNAC-28 2 IN 1 Type-C USB Tester Voltage Current Power Meter	Seller: Phonefix	FNIRSI FNAC-28 Multifunctional 2 in 1 Type-C USB Tester Digital Voltmeter Ammeter Amperimetor Vol...
	WF-EDU-02 Motor & Propeller Test Kit	Seller: Wing Flying Technologies Co., Ltd	WF-EDU-02 Motor & Propeller Test Kit Product Description Motor & Propeller Test Kitsare...
	WF-EDU-01 Motor and Propeller Test Kit	Seller: Wing Flying Technologies Co., Ltd	WF-EDU-01 Motor and Propeller Test Kit Product Description Suggested Propulsion system ...
	WF-EN-50 Engine Test Bench	Seller: Wing Flying Technologies Co., Ltd	Suggested Engine 110cc-350cc Engine Max Hanging Type Engine 20kg ...
	WF-EN-15 Engine Test Bench	Seller: Wing Flying Technologies Co., Ltd	WF-EN-15 Engine Test Bench Product Description Suggested Engine 110cc Engine ...