Ozone Resistance Test Chamber
Standards:
GB/T2423.24-95 Environmental Testing of Electronic and Electrical Products Part 2: Test Methods, Test SQ: Simulated Solar Radiation on the Ground
ASTM D1149 Test Method for Ozone Cracking of Rubber in a Controlled Environment
ISO 1431 Test method for resistance to ozone cracking of vulcanized or thermoplastic rubber
ASTM D1171 Standard Test Method for Rubber Aging - Ozone Surface Cracking in Outdoor or Test Chamber (Triangular Specimen)If you need more models about our test equipment, please reference our chamber-testing（.）com
Description and application
Ozone aging test chamber simulates and enhances the status of ozone in the atmosphere, studies the effect of ozone on rubber, and then identifies and evaluates the methods of rubber resistance to ozone and aging, takes effective anti-aging measures, and improves the service life of rubber products.JOEO ozone resistance test chamber is mainly used for ozone aging resistance test of polymer materials and products (rubber). Mainly used in rubber and plastic; Automobile production; Wire and cable; Packaging materials; Instruments and meters; Medical equipment; Civil nuclear energy; Civil aviation; Colleges and universities; Research laboratories; Inspection arbitration, technical supervision departments and other rubber products.
Structure:
Usually, there is only one door in the secret room, and the door on the left is open. It can also be made into a double door (customized).
There is a 50mm diameter test hole on the left side of the test box, equipped with a silicone rubber plug, which can be used for external testing of power or signal wires.
There is a hollow heated anti frost observation window on the door, which is resistant to high and low temperatures and is not affected by fog. It has LED lights that turn on when in use and off when not in use. The conventional observation window size is W400 * H300mm. There are silicone rubber sealing strips on the door, which are resistant to high and low temperatures, anti-aging, and have good sealing performance. To prevent condensation or frost on the door frame and edge during low-temperature testing, an electric heating defrosting device is installed on the door frame and edge. The door handle adopts a non reaction handle, with one hand opening the door, making it easy to operate, safe and reliable.
The inner and outer chambers of the JOEO ozone test chamber are made of SUS304 and spray coated steel plates, respectively. The inner box has buckles and multi-layer sample racks (please consult sales for specific quantities), all made of 304 material. The outer cavity is treated with sheet metal spraying, with beautiful color and corrosion resistance.
The equipment outlet is located below the rear. After connecting the water pipe, the water can be directly discharged into the sewer without pollution.
The control panel is located on the upper left side of the test box, and the conventional control is the PID touch screen. Humanized operation, English operating system, customizable in other languages, confirmation required before placing an order.
The sound and light alarm system is located above the control panel and has three colors: yellow (standby), red (alarm), and green (running). When the device is in different states, the corresponding indicator light will remain on.
Features:
JOEO Ozone test chamber equipment produces ozone gas by a quiet and efficient ozone generator, and after a certain amount of air is treated, the switch enters the test chamber in the mixture, the continuous online ultraviolet detector detects the ozone concentration, the ozone generator control feedback to the system, the control system effectively controls the occurrence of ozone according to the set value, so that the ozone chamber maintains the appropriate working concentration.All test conditions are satisfied through the heating and humidifying system.
Send product request
Other supplier products
 |
Thermal Shock Test Chamber (2 Zone) | Application Mainly used in aviation, aerospace, military units, electronics, IT industry and other test products in the surrounding atmospheric tem... |
 |
Solid Walk In Test Chamber | Application: JOEO solid walk in test chamber is an all-welded test chamber with an integrated construction that ensures durability for extreme test... |
 |
JOEO Stability Climate Test Chambers Pharmaceutical Stability Chambers | Application Scientific method for long-term drug failure evaluation to create a stable temperature, humidity and light environment, accelerate drug... |
 |
Walk In Salt Spray Chamber (Temperature Humidity Combine Salt Spray) | 在盐喷雾室行走不同于基本的盐喷雾试验室。在盐喷雾室行走使样品暴露在一系列不同的环境中,重复循环,包括温度、湿度、盐喷雾和干燥。 加速腐蚀试验方法包括ASTMB117、ASTMBG85、ISO9227、EC60068-2-52、EC61701、ISO7253等。新闻网 测试对象:电池组和... |
 |
BVS17 Pneumatic Bidirectional Vertical Shock Test System | BVS17 series pneumatic bidirectional vertical shock test system is the novel designed and developed forlarge specimens that cannot or are not easy ... |
Same products
 |
FNAC-28 2 IN 1 Type-C USB Tester Voltage Current Power Meter | Seller: Phonefix | FNIRSI FNAC-28 Multifunctional 2 in 1 Type-C USB Tester Digital Voltmeter Ammeter Amperimetor Vol... |
 |
WF-EDU-02 Motor & Propeller Test Kit | Seller: Wing Flying Technologies Co., Ltd | WF-EDU-02 Motor & Propeller Test Kit Product Description Motor & Propeller Test Kitsare... |
 |
WF-EDU-01 Motor and Propeller Test Kit | Seller: Wing Flying Technologies Co., Ltd | WF-EDU-01 Motor and Propeller Test Kit Product Description Suggested Propulsion system ... |
 |
WF-EN-50 Engine Test Bench | Seller: Wing Flying Technologies Co., Ltd | Suggested Engine 110cc-350cc Engine Max Hanging Type Engine 20kg ... |
 |
WF-EN-15 Engine Test Bench | Seller: Wing Flying Technologies Co., Ltd | WF-EN-15 Engine Test Bench Product Description Suggested Engine 110cc Engine ... |
