Cable extrusion tester
Product Introduction: The cable extrusion testing machine is suitable for the "GB/T 33594 electric vehicle charging cable" extrusion test, which automatically records the size of the electric resistance to extrusion pressure, and can also be used by changing the clamp for diameter less than 25mm rated voltage 500V and 750V copper core copper or copper alloy sheathing mineral absolute flattening test. Meet the standard: GB/T 33594-2017, GB/T13033.1-2007, IEC 60702-1:2002, etc Main parameters: 1, down speed :10mm+1mm/min, displacement speed adjustment range :1-200mm/min 2, pressure range :0——5000kgf（maximum protection pressure :3000kgf） 3, effective measuring range （%）：0.5-30KNN 4, unit switching :kgf, N, Lbf 5, accuracy level :1 6. Load accuracy: within +1% of the indicated value 7, travel range :0——300mm, displacement resolution :0.01mm 8. Monitor: Computer 9, displacement speed range :1——200mm/min 10. Speed input method: software setting 11, with automatic stop function 12, safety device: limit protection 13, overload protection: more than 10% of the maximum load automatic protection machine 14. Power system: servo motor 15, steel plate specifications :50X150, corner R10mm 16, pressure rod diameter :20mm. 17, a computer, printer （including test software） 18, Power supply :AC:220V+10%, 50HZ 5A 19, volume :80X40X150cm
Other supplier products
|
|
Electric hook core bending resistance testing machine |
Product Introduction:
The electric hook core anti-bending performance tester is used to test the anti-bending performance of the steel hook core. ... |
|
|
Medical injection needle puncture force tester |
The needle puncture force simulates the skin tester with a 5.7-inch (120 x 90) single color LCD touch screen, which is displayed in the Chinese men... |
|
|
Scrub Abrasion and Washability Tester |
Main uses:
Dry and wet sand abrasive wear testing machine is mainly used to evaluate the wear resistance of materials in dry and wet sand abrasive... |
|
|
Geosynthetic creep tester |
Scope of application:
DW1290 series geosynthetics creep test system is used to determine the tensile creep properties of geosynthetics products.
... |
|
|
Bone Screw Pull-out Tester |
Standard
YY/T 1504. ASTM F543:
standard specifies a test method for measuring the axial force required to extract or fail a metallic bone screw f... |
All supplier products
Same products
