.

Sand and Dust Test Chamber for Automotive Connectors

Operating Conditions:

Ambient temperature: 5°C~+28°C (average temperature within 24 hours ≤28°C); Ambient humidity: ≤85%

Technical Parameters:

1. Nominal spacing of the metal mesh is 50μm, and the nominal spacing between wires is 70μm
2. Airflow velocity: ≤2m/s (standard type) or ≥2m/s (specify when placing an order)
3. Continuous or periodic dust - blowing can be freely selected, or time can be set
4. Talcum powder dosage: 2kg - 4kg/㎡
5. Dust for testing: Dry talcum powder, portland cement, soot, etc.
6. Vibration time: adjustable from 0 to 9999 minutes (M represents minutes)
7. Fan cycle time: 0 to 9999 minutes (M represents minutes)
8. Standard configuration: The sand and dust testing equipment is equipped with 2 specimen racks and 2kg of talcum powder
9. Power requirements: AC380(±10%)V/50HZ, three - phase five - wire


Send product request

To: Qinsun Instruments Co., LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Infusion Apparatus Leakage Positive Pressure Tester
Infusion Apparatus Leakage Positive Pressure Tester M102 Infusion apparatus leakage positive pressure tester, It is suitable for the measurement of the airtight of injector for medical purpose, and i...
Thermal Insulation Materials Maximum Use Temperature Test Machine
Thermal Insulation Materials Maximum Use Temperature Test Machine Introduction This test method covers the determination of the performance of commercial sizes of plateforms of thermalinsulating materials when ...
Rockwell hardness tester
Rockwell hardness tester Technical parameters: Initial test force: 3kgf (29.42N),10kgf (98.07N) Test force: 15kgf(147.1N),30kgf(294.2N),45kgf(441.3N) 60kgf(588.4N),100kg...
Flammability Tester STD-CFR 1610
Flammability Tester STD-CFR 1610 Product Introduction Model:STD-CFR 1610 Standards ASTMD 1230 ASTM F 963 ASTM F2100 -16 CFR PART 1610 Features 1.Stainless steel cabnet, beauti...
Geomembrane Texture Height Tester
Geomembrane Texture Height Tester Scope of application: Suitable for rough surface roughness test of geomembrane. Meet the standard: CJ/T 234- Appendix F-2006. Instrument fe...
All supplier products

Same products

WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android
WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android Seller: China PHONEFIX Technology Co., Ltd WYLIE WL-155 SIM Card Tester is used to detect SIM card circuits and supports dual-SIM detection ...
HCV1500 High-precision Voltage Sensor
HCV1500 High-precision Voltage Sensor Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd HCV1500 high-precision voltage sensor is a voltage sensor that can measure DC, AC, pulse and vari...
Xenon Test Chamber
Xenon Test Chamber Seller: Standard International Group (HK) Limited Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
Single Cable Vertical Flame Tester
Single Cable Vertical Flame Tester Seller: Qinsun Instruments Co., LTD Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
Safety Helmet Flammability Tester
Safety Helmet Flammability Tester Seller: Qinsun Instruments Co., LTD Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...