Car seat component clearance test bench
Applicable standards:
Car seat component clearance test benches usually follow the following domestic and international standards:
QC/T 805-2008 "Passenger Car seat slide Technical conditions" and other relevant seat components of the technical conditions and testing requirements.
Main parameters:
Measuring range:
Depending on the specific type and size of the seat component, the measuring range of the test bench should be able to cover the size of the clearance required to be measured. For example, for the measurement of the seat slide gap, the test bench should be able to accurately measure the loose gap of the slide in the right and left, up and down, front and back directions.
Measurement accuracy:
The measurement accuracy of the test bench shall meet the requirements of relevant standards and regulations. Generally speaking, the measurement accuracy of the displacement sensor should reach ±0.1mm or higher to ensure the accuracy and reliability of the measurement results.
Loading force:
In the clearance measurement, it may be necessary to apply a certain loading force to simulate the force of the seat in actual use. The test bench should be able to provide a stable loading force and be able to adjust within the specified range.
Test speed:
The test speed should be set according to the specific test requirements and standards. In general, the test speed should be able to be adjusted within a certain range to adapt to the testing needs of different parts.
Data acquisition and processing:
The test bench should have the function of data acquisition and processing, which can record the data in the test process in real time, and carry out data processing and analysis. This helps to assess the conformity and consistency of the clearance of the seat components.
Degree of automation:
Modern automotive seat component gap test stands usually have a high degree of automation, and can automatically complete the test process, data recording and processing. This helps improve test efficiency and accuracy.
Safety and Reliability:
The test bench should have perfect safety protection measures and reliable mechanical structure to ensure the safety and reliability of the test process. For example, safety measures such as emergency stop button and overload protection device should be set up.
Send product request
Other supplier products
 |
Helmet Webbing Micro - displacement Abrasion Tester | Main Purposes It is used to detect the abrasion condition of the webbing, the micro - displacement performance of the webbing, and the fatigue lif... |
 |
Safety Helmet Roll-off device | Purpose Apply an initial load of a certain force to the rear of the helmet. Then, let a weight specified by the standard fall from a certain heigh... |
 |
Bone Plates Four - point Bending Fatigue Tester | Standard YY/T 1503-2016: Chinese standard specifying test methods for bending fatigue properties of metallic bone plates, requiring 1 million cy... |
 |
Haze and Transmittance Meter | Applicable standards: GBT 2410-2008: Determination of light transmittance and fog degree of transparent plastics. This is the national standard of... |
 |
ozone exposure chamber manufacturer | Ozone test chamberApplication It is suitable for a series of tests on color fastness and color fastness to airborne contaminants, such as knitted ... |
Same products
 |
Lingfeng (LF) Air-Cooled Integrated Refrigeration Chillers | Seller: Beijing Linggong Technology Co., Ltd. | TheLingfeng(LF)Air-Cooled IntegratedRefrigerationChillersis a professional refrigeration equipmen... |
 |
Low Temperature Chiller | Seller: Beijing Linggong Technology Co., Ltd. | Low Temperature Chiller The conditioning deviceis specifically designed for thermal and fluid dy... |
 |
Low-Temperature Control System | Seller: Beijing Linggong Technology Co., Ltd. | Low-Temperature Control System The conditioning deviceis specifically designed for thermal and f... |
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android | Seller: China PHONEFIX Technology Co., Ltd | WYLIE WL-155 SIM Card Tester is used to detect SIM card circuits and supports dual-SIM detection ... |
