Luminous Afterglow Performance Tester
Luminous Afterglow Performance Tester
The luminous afterglow performance tester is suitable for testing the luminous afterglow performance of various textiles. Fibers, yarns, and powders can all be tested.
Testing Principle
Use the specified light source as the excitation light source. Under the specified illuminance conditions, directly irradiate the sample. After the sample is excited to saturation, remove the excitation light source, and measure the afterglow brightness and decay time on the sample surface through a brightness meter.
Instrument Features
- Automatically record the brightness value within the set time through software. Fully automatic measurement, simple operation, capable of long-time measurement, and automatically save data.
- Multiple light-shielding designs in the fully enclosed test chamber reduce the influence of external light sources on test results.
- Automatically switch test samples. One set of samples can be tested at a time for 3 groups.
- Specially made imported sensors with fast sampling speed and high accuracy.
- Wide testing range, covering powders, fibers, yarns, fabrics, etc.
Applicable Standards
GB/T 43716 - 2024 Textiles - Test Method for Luminous Afterglow Performance - Photometer Method
Technical Parameters
- Excitation light source: Fluorescent lamp, color temperature (6500 ± 500) K
- Brightness meter: 0 - 10000 mcd/m², resolution: 0.01 mcd/cm², accuracy: ±5%
- Illuminometer: 0 - 10000 lx, resolution: 0.1 lx, accuracy: ±4%
- Approximate weight of the whole machine: 30 kg
- Power supply: AC 220V/50Hz
- Approximate external dimensions: 375 x 500 x 598 mm (W x D x H)
Standard Configuration
- 1 main unit
- 1 Lenovo integrated computer
- 1 Lenovo laser printer
- 3 sample clamps
- 1 excitation light source
Send product request
Other supplier products
 |
Metal Corrosivity Tester | standards GB/T 15970 ISO 7539 ASTM G31 GB/T 10125 Scope of Application The metal corrosivity tester is designed and manufactured in line with... |
 |
Big 45°Method Suture Flame Contact Times Tester | Product details This instrument is used for testing flame exposure times of flame retardant protective clothing stitches. Standards GB 8965-1998... |
 |
Spinal Internal Fixation System Component Testing Machine | Standard YY/T 0119-2014 (China): Specifies mechanical testing protocols for spinal fixation components, including screws, plates, rods, and connec... |
 |
Automotive wire cyclic bending testing machine | StandardThis testing machine aligns with global automotive industry standards for wire harness reliability, includingISO 6722(Road vehicles –... |
 |
Abrasive Wear Testing Machine | Standard ASTM G65 - 04 GB/T 3960-1983 Main Purposes The wet - type rubber wheel abrasive wear testing machine is primarily employed to assess t... |
Same products
 |
Optical Brightener OB-1 (OBA 393) | Seller: Jinan Ogilvy Chemical Co., Ltd | Chemical Name: 2-[(Ethylsulfanyl)methyl]phenyl methylcarbamateC.I.: 393CAS: 1533-45-5Molucular Fo... |
 |
PH-A63 Waterproof PH/EC/Temperature Meter | Seller: Kelilong Electron Co.,Ltd | Model PH-A63 Range PH ～14.00PH EC 0～19.99mS/c... |
|
|
PH-A6 Waterproof pH and Temperature Meter | Seller: Kelilong Electron Co.,Ltd | Model PH-A6 Range PH ～14.00PH Temp 0～50℃ ... |
|
|
PH-A8 Waterproof Soil PH Meter | Seller: Kelilong Electron Co.,Ltd | Model PH-A8 Range PH ～14.00PH Temp 0～50℃ ... |
 |
TH021WIFI Internet of Things TEMP&HUMIDITY Controller | Seller: Kelilong Electron Co.,Ltd | Product description: The electronic thermostat can be used for a variety oftemperature control... |
