Geosynthetics thickness tester
Scope of application:
Used to determine the thickness of various geosynthetic materials under specified pressure and time. The sample is placed on the reference plate, and after a specified pressure is applied to the sample with a circular presser foot parallel to the reference plate for a certain period of time, the vertical distance between the two plates is measured, and the thickness of the sample is expressed as the average value of the test results.
Meet the standard:
GB/T13761.1-2009,S0 ,ASTM D5199-2001,JTG E50T1112-2006,SL/T 235-5-2012, etc.
Instrument features:
Design and manufacture according to the standard, in line with the standard specifications;
Shell with special surface treatment, corrosion resistance;
Exquisite mechanical pressure system, simple operation can apply 2KPa, 20KPa, 200KPa precise pressure on the sample;
The adjustable level makes the specimen stressed evenly:
The instrument is easy to install and operate;
Using dial gauge measurement, high precision;
The measurement value is displayed digitally for easy reading.
Technical parameters:
Pressure mode mechanical
Measuring range 0.001——12mm
Minimum division value 0.001mm
Presser foot size 2500mm2
Working pressure 2+0.01kPa,20+0.1kPa,200+1kPa
Overall dimensions 600x300x400mm
Weight 40kg
Standard configuration:
1. One host
2. 1 dial table
3. Use 3 weights
4. 1 pan
5. One battery
6. Four screws for the foot
7. Product packing list 1 copy
8. 1 copy of product manual
9. One copy of product certificate
Send product request
Other supplier products
 |
Helmets Designated Protection Areas Tester | Main Purposes 1. Used to mark test points and test lines on helmets. 2. Used for line - marking according to different test standards. 3. Used t... |
 |
Wear Track Profilometer | Main uses: The probe type material surface abrasion measuring instrument is a kind of high precision measuring equipment, its main purpose is to a... |
 |
Falling Sand Abrasion Tester | Standards GB811-2022. GB24429 GB/T 38305 GJB1564A GA/T44. GA293 GA294 GA295 GA296 ASTMD968 ASTMD333 ASTMD1395 ASTMD2205 Main applicati... |
 |
Abrasive Wear Testing Machine | Standard ASTM G65 - 04 GB/T 3960-1983 Main Purposes The wet - type rubber wheel abrasive wear testing machine is primarily employed to assess t... |
 |
Taber Abrasion Tester (Double-Head) | Standards DIN Standards: DIN 53754 (plastics), DIN 53109 (paper/board), DIN 52347 (glass/plastics) ASTM Standards: ASTM D1044 (transparent plas... |
Same products
 |
WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android | Seller: China PHONEFIX Technology Co., Ltd | WYLIE WL-155 SIM Card Tester is used to detect SIM card circuits and supports dual-SIM detection ... |
 |
HCV1500 High-precision Voltage Sensor | Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd | HCV1500 high-precision voltage sensor is a voltage sensor that can measure DC, AC, pulse and vari... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
