Geotextile wear tester
Scope of application:
The wear resistance of geotextile and its related products was measured by emery cloth-sliding block method. During the experiment, the sample is mounted on a fixed platform and rubbed with an abrasive with specified surface properties. Under the condition of controlling the pressure and friction action, the abrasive moves in a straight line along the horizontal axis. Wear resistance is expressed as the percentage loss of tensile strength of the specimen before and after friction.
Meet the standard:
GB/T 17636-1998,1S0 13427-1998,etc
Instrument features:
Applicable to textiles and related products:
Stainless steel structure, durable;
Special fixture design, easy to install the sample, to avoid the sample slipping during the test;
Friction cycle can be set:
Easy to install and operate.
Technical parameters:
Effective friction area 50x200mm 75x200mm
Reciprocating frequency 90 reciprocating times/min 10——115 reciprocating times/min
Reciprocating stroke 25±1mm 25±1mm
Load 6+0.01kg 1±0.01kg
Count range 1 to 9999 cycles configurable
Power supply AC 220V 50Hz
Standard configuration:
1. One host
2. One counterweight
3. Five pieces of dry abrasive cloth
4. Product packing list 1 copy
5. 1 copy of product manual
6. One copy of product certificate
Send product request
Other supplier products
 |
Bending-Folding-Stiffness Testers | Product Information: Bending-Folding-Stiffness Testersdetermines the breakdown resistance of leather, vinyl coated fabric, synthetics, rubberoids,... |
 |
Hard Casing Retardant Performance Test Machine | Introduction Thismachuineis according to the provisions of paragraph 6.10 JG3050-1998 in combustion testing requirements to develop and produce. Th... |
 |
SBI Single Burning Item | Introduction Single burning instrument (SBI) was measured supplies (excluding floorings) performance at a single burning heat invasion conditions.... |
 |
Geomembrane Texture Height Tester | Scope of application: Suitable for rough surface roughness test of geomembrane. Meet the standard: CJ/T 234- Appendix F-2006. Instrument fe... |
 |
Building Material Smoke Density Testing machine | Product details In the event of fire, people are choked by smoke or can not escape because they can not see the road. Therefore, in the prevention... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android | Seller: China PHONEFIX Technology Co., Ltd | WYLIE WL-155 SIM Card Tester is used to detect SIM card circuits and supports dual-SIM detection ... |
 |
HCV1500 High-precision Voltage Sensor | Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd | HCV1500 high-precision voltage sensor is a voltage sensor that can measure DC, AC, pulse and vari... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
