Geosynthetic Clogging Tester
Scope of application:
The method of gradient ratio is used to measure the permeability coefficient and permeability ratio of soil and geotextile system and its interface under no-pressure conditions, and the mud content of geotextile is measured to determine whether the geosynthetic material is used as a filter layer of some soil, and whether the blockage is not allowed.
Meet the standard:
ASTM D5101-2006JTG E50 T1145-2006,SL/T , etc
Instrument features:
Suitable for all kinds of soil and geotextile;
Floor type design, stable fuselage structure, not easy to deformation:
Plexiglass test chamber can visually observe the silting process of geotextiles:
The seal of the specimen holding device in the test cylinder is good to ensure the feasibility of the test.
The height of the test cylinder is reasonable, and a certain space is reserved above the soil sample to make the water flow uniform and stable.
Manual rotary hand wheel drive, water level regulation, efficient and smooth:
6 pressure gauges for easy pressure observation and high measurement accuracy:
Easy to install, easy to operate.
Technical parameters:
Instrument type floor type
The inner diameter of the test cylinder is 100mm
The sample height is 100mm
Head difference adjustment range 0——1050mm
Head difference accuracy ±1mm
Support net aperture 6mm
Overall dimensions 450x400x980mm（LxWxH）
Weight 75kg
Send product request
Other supplier products
 |
Electrode tortuosity tester & diaphragm ion conductivity test device | Standard Electrode Tortuosity Analyzer: ASTM E1970-21 (Electrochemical Impedance Spectroscopy) ISO 18516 (Conductive Coatings – Resistivit... |
 |
Limiting Oxygen Index Chamber | Product details The Limiting Oxygen Index (LOI) fire test is perhaps the most economical and precise quality control test for combustible material... |
 |
Friction Charging Tester | Friction charged charge testerFriction Charging Testeris the antistatic fabric and knitted fabric friction generated by the amount of charged charg... |
 |
Bone Cement Four-Point Bending Fatigue Tester | Standard YY/T 1429 (China): Specifies four-point bending fatigue tests for acrylic resin bone cements under quasi-static and cyclic loading. ISO ... |
 |
Textile water evaporation rate tester | Standard: The design and operation of this tester are aligned with key international and national standards related to assessing the moisture mana... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android | Seller: China PHONEFIX Technology Co., Ltd | WYLIE WL-155 SIM Card Tester is used to detect SIM card circuits and supports dual-SIM detection ... |
 |
HCV1500 High-precision Voltage Sensor | Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd | HCV1500 high-precision voltage sensor is a voltage sensor that can measure DC, AC, pulse and vari... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
