Geomembrane Hydrostatic and Permeability Tester
Scope of application:
It is used to test the hydrostatic pressure resistance and permeability coefficient of nonwoven composite geotextile （one cloth, one film, two cloth, one film） produced with polyethylene and polyurethane as the substrate and other materials under the specified water pressure difference conditions.
Meet the standard:
GB/T19979.1-2005,GBT19979,2-2006,GB/T17642,JTG E50 T1142-2006,JTS/T 245-2023, etc
Instrument features:
Can be used in one machine, equipped with 2 sets of test fixtures, in line with the national standard hydrostatic pressure and permeability coefficient test;
High precision pressure system, using gas-liquid mixed structure, to ensure stable pressure;
Solenoid valve control water inlet and outlet;
Equipped with percolating water collection device to prevent the collected percolating water from evaporating;
Equipment safety protection device.
Technical parameters:
Specimen diameter 200mm
The hole diameter of the perforated plate is 3mm±0.05mm
The center distance of the perforated plate is 6mm
Infiltration water collection pipe capacity 15ml
The precision of the permeable water collection tube is 0.1ml
Pressure range 0——2.5MPa
The pressure system error is ±2%6
Dimensions 900x600x1450mm（LxWxH）
Weight 150kg
Send product request
Other supplier products
 |
Geomembrane Environmental Stress Cracking Resistance Tester | Scope of application: The stress cracking strength of polyolefin geomembrane was measured and evaluated by notch constant load tensile test. Durin... |
 |
Oxidizing Solids Test device | Product Description Conforms to UN Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria 34.4.1 Test O.1: Test for ox... |
 |
Direcct flame impingement Tester with BS 476-12 | Introduction: The testeris designedaccording to the BS476-12:1991.Method of test for ignitability of products by direct flame impingement.The accu... |
 |
Absorbable Bone - connecting Plates Four - point Bending Tester | Standard ASTM F2119: Standard test method for constant load testing of bioabsorbable screws and washers, applicable to bending performance evalu... |
 |
Adiabatic Accelerated Calorimeter | Product Description Adiabatic Accelerated Calorimeter determines the thermal behavior of samples under adiabatic conditions by keeping the tempera... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android | Seller: China PHONEFIX Technology Co., Ltd | WYLIE WL-155 SIM Card Tester is used to detect SIM card circuits and supports dual-SIM detection ... |
 |
HCV1500 High-precision Voltage Sensor | Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd | HCV1500 high-precision voltage sensor is a voltage sensor that can measure DC, AC, pulse and vari... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
