Large scale Calorimeter
Product details
According to the heat release rate, calorie is divided into several types. The most common calorimeters include a cone calorimeter which is used to measure 10x10cm object and the furniture calorimeters which is used to evaluate the burning of 1 to 3 megawatts of the furniture (corner fire test).In order to ensure the safety of fire performance, depending on its purpose and the scale and fire performance rating of buildings and large complexes (including locomotives, vehicles, warehouses and configurations), these fire performance should have been achieved through the use of raw materials, building, the solid model performs extensive fire performance tests to verify that this test will reduce fire life and property damage. In other words, it is recommended to use a double cone calorimeter (raw material) - room angle detector / single combustion project / ISO13784-1 (micro model) - large cone calorimeter (solid) test to determine the fire safety performance classification criteria , and according to the combustion risk, the purpose and the equipment within the building specifications, which can control a wide range of fire safety performance test.
Large calorimeter heat release rate test device is used for testing and analysis the ignition characteristics, heat release rate, mass loss rate, effective heat and gas analysis of large objects or structures placed in the open space combustion process. Combine the direct physical combustion to simulate the occurrence of fire, and then analyze the collected flue gas data to understand the combustion characteristics of various experimental bodies; I t can also study the best way to eliminate fire to reduce the safety of life and property caused by fire in the test.
10MW large-scale calorimeter equipment is currently not yet developed international standards. The current design and assembly based on the main reference ISO5660-1 and ISO9705 design principles. The system covers fire safety systems, smoke extraction systems and flue gas treatment systems, sample gas sampling systems and gas analysis systems, ignition systems, software control systems.
Standards
ISO 9705. 1993Fire tests; full-scale room test for surface products
IEC 60332-3Tests on electric and optical fibre cables under fire conditions
EN 45545Fire protection of railway vehicles - Part 2: Requirement for fire behaviours of materials and components
EN 50399Common test methods for cables under fire conditions
Systems
Combustion systems, ignition circuit systems, control systems, exhaust systems, gas sampling and pretreatment systems, gas analysis systems.
Features
The filter is installed on the air flow diagram in order to remove moisture and dust;
Each filter can be exchanged with the differential sensor;
The adjustable calibrator can control the pressure of each sample gas supplied to the gas analysis frame;
Installed with a humidity measuring instrument and sensors to measure the humidity of the test space;
The gas sampling pipeline minimum 40PSI pressure can send the sample gas to about 50m of the analytical instrument;
When the test is according to oxygen consumption to test the heat release rate, anti-blocking two-way pipeline can be used to test the air flow. This is the reason why the heat flow will have so many solid and liquid, including soot, tar and other particles;
The use of Teflon anti-corrosion hose, sampling gas pipeline and instrumentation can minimize the degree of chemical deterioration of the sampled gas after corrosion or heating;
In order to protect the condensation, install with a heating tube to maintain the sampling pipe outside the temperature;
Flange test station is consisted with a two-way probe, sampling probe and smoke density test system, each compound is made of anti-corrosion materials;
Heat flow meter and water cooling system can measure the actual fire source to release the heat radiation;
As a test method for all test items, heptane is often used, but the calibrated burner will also be used alone. In particular, when using an oxygen consumption test method, the calibration burner will be used to test the net burn calories.
Send product request
Other supplier products
 |
Button Impact tester | Standards: ASTM D5171: Test Method for Abrasion Resistance of Inks and Coatings (referenced for impact-related durability assessments). Applicati... |
 |
Metal Wire Wrap Tester | According to the criteria: GB/T 2976 "Wire winding test method for Metal Materials" ISO 4101 Cold drawn steel wire for elevator wire ropes - Tech... |
 |
Metal Wire Bending Fatigue Tester | Main uses: Metal wire repeated bending tester used for repeated bending test of wire, for different specifications of wire bending radius can be r... |
 |
Martindale Abrasion Tester | Martindale Abrasion And Pilling Tester Martindale Abrasion & Pilling Tester. To determine the abrasion and pilling resistance of all kinds of ... |
 |
Paper and cardboard crease stiffness meter | Product Introduction: ZY-TDY300 microcomputer bending stiffness tester is used to measure the bending stiffness of paper and cardboard materials w... |
Same products
 |
PHS‑25C Benchtop Digital pH Meter | Seller: Kelilong Electron Co.Ltd | Product Description: Equipped with BNC‑composite electrodes and power supplies adapt... |
 |
PHS‑3C Automatic Calibration pH/Thermometer | Seller: Kelilong Electron Co.Ltd | Product Description: Equipped with BNC‑compatible combination electrodes and power s... |
 |
KL‑016 Benchtop Digital pH Meter (Backlit Display) | Seller: Kelilong Electron Co.Ltd | Product Description: This instrument features a large‑screen digital display, extern... |
 |
KL‑98 Professional Laboratory pH/ORP/Temperature Meter | Seller: Kelilong Electron Co.Ltd | Product Description: The PH‑98 Tester is an easy‑to‑operate, multi‑functional microp... |
 |
KL‑03(I) Pen‑type High‑precision pH Meter | Seller: Kelilong Electron Co.Ltd | Product Description: This instrument is available in a variety of colors. Calibratio... |
