EJA510A EJA530A Absolute And Gauge Pressure transmitter
EJA510A EJA530A Absolute and Gauge Pressure transmitterFeatures :The absolute and gauge pressure transmitter model EJA510A and EJA530A can be used to measureliquid,Website:, gas, or steam pressure. Both output a 4 to 20 mA DC signal corresponding to the measured pressure, and also feature remote setup and monitoring through communications with the BRAIN™ terminaland CENTUM CS™ or µXL™ or HART® 275 host.Specifications :Supply Voltage “”10.5 to 42 V DC for general use and flameproof type10.5 to 32 V DC for lightning protector (Optionalcode /A)10.5 to 30 V DC for intrinsically safe, Type n,nonincendive, or non-sparking typeMinimum voltage limited at 16.4 V DC for digitalcommunications, BRAIN and HARTLoad (Output signal code D and E)0 to 1335 for operation250 to 600 for digital communicationEMC Conformity Standards “” ,EN61326-1 Class A, Table2 (For use in industriallocations)EN61326-2-3European Pressure Equipment Directive 97/23/ECSound Engineering PracticeWith option code /PE3Category III, Module H, Type of Equipment: PressureAccessory-Vessel, Type of Fluid: Liquid and Gas,Group of Fluid: 1 and 2Communication Requirements “”BRAINCommunication DistanceUp to 2 km (1.25 miles) when using CEV polyethylene-insulated PVC-sheathed cables. Communicationdistance varies depending on type of cable used.Load Capacitance0.22 F or less (see note)Load Inductance3.3 mH or less (see note)Spacing from power line15 cm or more.Input Impedance of communicating device10 k or more at 2.4 kHz. Technical parameters : Products show : Why chose us :
Other supplier products
All supplier products
Same products
