SA179 Bright Annealed Heat Exchanger Tube
Specifications:1) Size range: 6 - 114.3mm OD x 1 - 14mm WT2) Heat treatment: annealed,Website:, bright annealed3) Standards: ASTM/ASME A179/SA179, ASTM A199, JIS G34644) Continuous stenciling as per requirement5) Rust prevention treatment, oiled6) Plastic plugs in both ends7) Hexagonal bundles of max. 2,000kg with several steel strips8) Smooth surface, soft mechanical property, tight toleranceInner packing:Two tags on each bundleOuter packing:Wrapped in waterproof paper, PVC sleeve, and sackcloth with several steel stripsOne tag tied on the outer packageHeavy Tri-wall boxes, wooden boxes, slats or frames if client required
Other supplier products
|
|
Austenitic Stainless Steel Pipe |
Austenitic stainless steel is stainless steel in high temperature and room temperature. The Ni,Website:, 8%~10% Cr and C about 0.1%, with a stable ... |
|
|
U BEND TUBE For Heat Exchanger |
U-Bend TubeU-bend tubes are widely used in heat-exchanger systems. Heat-exchanger equipment on the basis of seamless stainless U-tubes is essential... |
|
|
Corrugated Tube |
The corrugated tube presents a uniform helical deformation both internally and externally.This deformation creates an internal turbulence that allo... |
|
|
Honed Tubes For Hydraulic Cylinders |
Honed Tube,Website:, with standard DIN2391,EN10305-1/2,GB/8713,we manufacture from OD40mm to 800mm and length 14meter max. Our yearly capacity is 1... |
|
|
Drawn Over Mandrel Tubes |
Drawn Over Mandrel Tubes (DOM)Drawn Over Mandrel tubes according to tubing manufacturing standards like ASTM A513 type-5 & -6 or equivalent to meet... |
All supplier products
Same products
