Spring Clip Washers
1.Technical Parameters and Drawings HE CodeDimensionsWt./1000Hole dia.LengthBolt dia.kgSCW1/29/16"2 1/2"1/2"104.33SCW5/811/16"3 3/4"5/8"453.59SCW3/413/16"3 3/4"3/4"444.52SCW7/815/16"3 1/2"7/8"394.62SCW11 1/16"3 1/2"1"385.55SCW1 1/41 3/8"3 3/4"1 1/4"412.771. Tolerance: ±5% 2. All dimensions are in inch except for marked.3. Material: carbon steel 4. Finish: hot dip galvanized 5. Customized sizes are available at request.2.Product Description:Spring clip washers are usually produced to keep units in tension on wood, are installed under the nut of a bolt and next to the cross arm to keep connections tight and static proof.Material steel is hot dipped galvanized to ASTM A153.The above are typical only, please consult Shanghai Herrajes for further information.3.Product Details:Name: spring clip washers, bonding clip, static washersHS code: 7318210001Model: ANSI/ASMEPackage: bulk packing; palletized; as requiredTrademark: HE, as requiredOrigin: ChinaRaw material: carbon steel Q235Finish: HDGODM&OEM service: yesSample: available, FOCPayment term: T/T, 30% prepayment and 70% balance against B/LCertificate: ISODelivery time: 20-40 daysMOQ: 500kgsExport term: FOB; CIFProduction capacity pcs/day: 2000 Minimum tensile strength lbs.: 7000 Hole dia. in: 9/16, 11/16, 13/16,etc.For bolt dia. in: 1/2, 5/8, 3/4, 7/8, 1, 1 1/4,etc.
Other supplier products
|
|
Spring Clip Washers |
1.Technical Parameters and Drawings HE CodeDimensionsWt./1000Hole dia.LengthBolt dia.kgSCW1/29/16"2 1/2"1/2"104.33SCW5/811/16"3 3/4"5/8"453.59SCW3... |
|
|
Oval Ball Eyes Oval Ball Eyes |
1.Technical Parameters and DrawingsHE CodeDimensions(mm)Designated size of couplingRated failure loadWt.ABCDΦR(KN)(kg)QH-75710033.3171616700.6QH-10... |
|
|
Insulator Mounting Studs |
1.Technical Parameters and DrawingsHE CodeIMS-1HE CodeIMS-2HE CodeIMS-31. Tolerance: ±5% 2. All dimensions are in MM3. Material: carbon steel 4. ... |
|
|
Ball Hooks |
1.Technical Parameters and DrawingsHE CodeDescriptionBHS-1short shank ball hookHE CodeDescriptionBHL-1long shank ball hookNotes:1. Tolerance: ±5% ... |
|
|
Service Mast Brackets |
1.Technical Parameters and Drawings
HE CodeDimensionsWt.Pipe dia.kgSMB-11 1/4" - 3"0.463Notes:1. Tolerance: ±5% 2. All dimensions are in In... |
All supplier products
Same products
