Lag Screw Pins
1.Product Description:Lag screw pins are produced for pole and transformer wiring.Forged steel, hot dip galvanized.1" cast lead thread.T he above are typical only, please consult Shanghai Herrajes for further information.2.Product Details:Name: lag screw pinsHS code: 7326Model: ANSI/ASMEPackage: bulk packing; palletized; as requiredTrademark: HE, as requiredOrigin: ChinaRaw material: carbon steelFinish: HDGODM&OEM service: yesSample: available, FOCPayment term: T/T, 30% prepayment and 70% balance against B/LCertificate: ISODelivery time: 20-40 daysMOQ: 500kgsExport term: FOB; CIFProduction capacity pcs/day: 2000 Minimum tensile strength lbs.: Lead thread in: 1,etc.Shank dia. in: 1/2, 5/8, etc.Base dia. in: 1 3/4, 2,etc.Height above arm in: 6, 5, etc.Overall length in: 9, 8,etc.
Other supplier products
|
|
Yoke Plates |
1.Technical Parameters and DrawingsHE CodeDimensions(mm)Wt.Rated failure loadD1D2ALΦR1ΦR2(kg)(kN)YPL.43100YPL.66120YPL.8160YPL.9200YPLYPL.8200YPLYP... |
|
|
Lag Screws |
1.Technical Parameters and DrawingsHE CodeDimensions(in)Wt./1000ΦDLThreaded LengthkgLS1/4-11/4"1"1" LS1/4-11/41/4"1 1/4" 9.07LS1/4-11/21/4"1 1/2" ... |
|
|
Square Meter Boxes |
1.Technical Parameters and DrawingsHE CodeDescriptionHWDHub sizeMBS01200 Amps,240/600 V,Single phase,3 wires,4 terminals,Ringtype, phosphated treat... |
|
|
Round Eye Bolts |
1.Technical Parameters and DrawingsHE CodeDimensionsWt. kgABCEDia. ΦDEBR1/2-66" (152.4)4" (101.6)1 1/4"(31.8)11/16"(17)1/2(12.7)0.18EBR1/2-88" (203... |
|
|
Square Nuts |
1.Technical Parameters and DrawingsHE CodeDimensionsWt./1000ΦDABCkgSN1/41/4"7/32"1/2"7/16"8.00SN3/83/8"21/64"7/8"5/8"11.79SN1/21/2"7/16"1 1/8"13/16... |
All supplier products
Same products
