Service Mast Brackets
1.Technical Parameters and Drawings
HE CodeDimensionsWt.Pipe dia.kgSMB-11 1/4" - 3"0.463Notes:1. Tolerance: ±5% 2. All dimensions are in Inch except for marked. 3. Finish: steel hot dip galvanized per ASTM A153 4. Customized sizes are available at request.2.Product Description:Service mast brackets, used with a service wedge clamps, are produced to attach to pipe service masts to provide a secure attachment point for service drop wire. The rounded center of the front strap is formed prevent damaging the bail of service wedge clamps.An square hole at end of the front slot seizes the bolt head during installation and prevents slipping.Material steel is hot dip galvanized.The above are typical only, please consult Shanghai Herrajes for further information.3.Product Details:Name: service mast brackets, pipe clamps, service deadend brackets, wall bracket, shelf bracket, pipe supportsHS code: 7326909000Model: Package: bulk packing; palletized; as requiredTrademark: HE, as requiredOrigin: ChinaRaw material: carbon steelFinish: hot dip galvanizedODM&OEM service: yesSample: available, FOCPayment term: T/T, 30% prepayment and 70% balance against B/LCertificate: ISODelivery time: 20-40 daysMOQ: 500kgsExport term: FOB; CIFProduction capacity pcs/day: 2000 Adjustment In: 1 1/4-3
Other supplier products
|
|
Crossarm Corner Pins |
1.Technical Parameters and DrawingsHE CodeCCP-011. Tolerance: ±5% 2. All dimensions are in MM3. Material: carbon steel 4. Finish: hot dip galvani... |
|
|
Ball Hooks |
1.Technical Parameters and DrawingsHE CodeDescriptionBHS-1short shank ball hookHE CodeDescriptionBHL-1long shank ball hookNotes:1. Tolerance: ±5% ... |
|
|
Ball Clevis Extension Links |
1.Technical Parameters and DrawingsHE CodeDescriptionBCL-1ball clevis extension linkNotes:1. Tolerance: ±5% 2. All dimensions are in MM except for... |
|
|
Flat Crossarm Braces |
1.Technical Parameters and DrawingsHE CodeDimensionsWt./100kgsABCECBF14-2626" (660.4)24" (609.6)1/4" (6.35)1 1/4"(31.75)104.33CBF14-2828" (711.2)26... |
|
|
Thimble Eyenuts |
1.Technical Parameters and DrawingsHE CodeWt.kgENT5/80.354Notes:1.Tolerance: ±5%2.Producing standard: ANSI C 135.5 3.All dimensions are in MM exce... |
All supplier products
Same products
