Socket Eyes
1.Technical Parameters and DrawingsHE CodeDimensionsDesignated size of couplingWt.Rated failure loadABCDΦR(kg)(kN)W-7A701634.519.220160.6970W-7B1151634.519.220160.8670W1-10851834.519.220160.9100W1-12902034.519.224161.3120W-12902042.52324201.4120W.539243.5300Notes:1. Tolerance: ±5% 2. All dimensions are in MM except for marked. 3. Finish: hot dip galvanized per ASTM A153 4. Customized sizes are available at request.2.Product Description:Material:Galvanized forged steel for bodyBronze for W clip..Stainless steel for split pin.Socket according to AS 1154.1 : 2004 or IEC 120.Split pin according to IEC 372.The above are typical only, please consult Shanghai Herrajes for further information.3.Product Details:Name: socket clevis, WS type socket clevis, WS type round head hung platesHS code: 7326Model: AS 1154.1 : 2004Package: bulk packing; palletized; as requiredTrademark: HE, as requiredOrigin: ChinaRaw material: malleable cast iron, steel, copper, stainless steelFinish: hot dip galvanizedODM&OEM service: yesSample: available, FOCPayment term: T/T, 30% prepayment and 70% balance against B/LCertificate: ISODelivery time: 20-40 daysMOQ: 500kgsExport term: FOB; CIFProduction capacity pcs/day: 2000 Minimum failing load Kn: 70
Other supplier products
|
|
Low Voltage Insulator Pins |
1.Technical Parameters and DrawingsHE CodeDimensionsWt.ForABCDEFdkgcrossarmIPDL5/8-15 3/4"5"2"1 3/4"1"3"5/8"0.816woodIPDL5/8-25 3/4"6"2"1 3/4"1"3"5... |
|
|
Spring Clip Washers |
1.Technical Parameters and Drawings HE CodeDimensionsWt./1000Hole dia.LengthBolt dia.kgSCW1/29/16"2 1/2"1/2"104.33SCW5/811/16"3 3/4"5/8"453.59SCW3... |
|
|
Crossarm Corner Pins |
1.Technical Parameters and DrawingsHE CodeCCP-011. Tolerance: ±5% 2. All dimensions are in MM3. Material: carbon steel 4. Finish: hot dip galvani... |
|
|
Lag Screw Pins |
1.Product Description:Lag screw pins are produced for pole and transformer wiring.Forged steel, hot dip galvanized.1" cast lead thread.T he above a... |
|
|
Insulator Mounting Studs |
1.Technical Parameters and DrawingsHE CodeIMS-1HE CodeIMS-2HE CodeIMS-31. Tolerance: ±5% 2. All dimensions are in MM3. Material: carbon steel 4. ... |
All supplier products
Same products
