Sintered AlNiCo Magnet
AlNiCo magnet is the earliest developed permanent magnet material in 1930s,Website:, which is made of an alloy of aluminum, nickel, cobalt, iron and other trace metals. At that time, it had best magnetic properties and low temperature coefficient, so it widely used in permanent magnet motor. After 1960s, with the development of ferrite magnets and NdFeB magnet, the AlNiCo magnets were replace by them in the fields of permanent magnet motor step and step.According to the different production process is divided into Sintered AlNiCo and Cast AlNiCo. Sintered Alnico magnet is manufactured using a powder metallurgy process which uses controlled atmosphere, high temperature sintering to produce near net shape parts. These may range in size from as little as .05g to 150g. Semi automated production enables adjustment of materials, and processing allows either a standard range of magnetic properties or individually tailored alloys to meet customer specifications.Sintered AlNiCo offer slightly lower magnetic properties but better mechanical characteristics than the cast AlNiCo. Sintered AlNiCo magnets are most suitable in small sizes. The sintering process is well suited to large volume production, and results in parts which are structurally stronger than cast magnets. Relatively close tolerances can be achieved without grinding.Typical magnetic properties of Sintered AlNiCo:Equivalent MMPA ClassGradeBrHcb(BH)max(Br)TcTw(Max)DensitymTGsKA/mOeKJ/m3MGOe%/&&&g/cm3S.Alnico 3FLN.13-0.0227604506.7S.Alnico 2FLNG.41.55-0.0148104507S.Alnico 7FLNGT.2-0.028505007.2S.Alnico 5FLNG.25-0.0168905007.2S.Alnico 6FLNGT.5-0.028505007.2S.Alnico 8FLNGT.028505007.2FLNGT.75-0.028505007.2S.Alnico8HCFLNGT33J.5-0.0258505007.2
Other supplier products
|
|
Glass Sealed And Controlled Expansion Alloys |
Precision Alloy 4J28The application of Precision Alloy 4J28:It is applied to seal the equipment of the electric component with the soft glass.Glass... |
|
|
High Temperature Nickel Alloy |
High Temperature Nickel AlloyNickel-Chromiun High temperature alloys*Alloy A286,Website: S66286,SAE AMS 5726,Chinese GH2132*Inconel 600,ASTM B564,U... |
|
|
Sintered AlNiCo Magnet |
AlNiCo magnet is the earliest developed permanent magnet material in 1930s,Website:, which is made of an alloy of aluminum, nickel, cobalt, iron an... |
|
|
Pressing Bonded SmCo Magnet |
Pressing Bonded SmCoPressing Bonded SmCo magnet is made by mixing the SmCo magnetic powder with polymer materials,Website:, then through the mold t... |
|
|
Permendur 2V |
Permendur 2V/Hiperco 50AHigh Saturation magnetic induction soft magnetic alloys 1J22(GB/TPermendur 2V is high saturation magnetic induction strengt... |
All supplier products
Same products
