Perforated Plug Low Noise Type
SCN is remodel product of SGC. The series are dedicated specifically for low noise
and critical anti-cavitation applications on liquid, gas or steam. Unique perforated
cylinder plug and multi hole cage control flowing velocities in the valve trims to
carry out fluid rationally expand and scientifically arrange pressure grads. The noise
level is considerably reduced by 20-30 dBA.
SCN series is particularly effective for modulating compressible fluids at high
pressure drop ratios.
Standard Specification
Valve Body
Type: Cast globe Valve
Nominal Size: DN15, 20, 25, 32, 40, 50, 65, 80, 100,
150, 200, 250, 300, 350, 400
Nominal Pressure: ANSI 150, 300
DIN PN16, 25, 40
JIS 10K, 20K, 30K
GB PN1.6, 2.5, 4.0 MPa
End Connection: Flange ANSI B16.5 RF, RTJ
DIN2543/2544/2545 RF
JISB2201 RF
JB/T81 RF
JB/T82.2 FM
Weld: ANSI B16.5 SW(DN<50); BW(DN>50)
Face to Face Dimension:
ANSI150RF, JIS10K (IEC60534-3-1 37 Series)
ANSI300RF, JIS20K, JIS30K (IEC60534-3-1 38 Series)
ANSI150/300 RTJ (ASME B16.10 CLASS 150/300RTJ)
DIN PN16, 25, 40 (DIN3202-F1)
GB PN1.6, 2.5, 4.0 MPa (ISO5752 1 Series)
Please refer to table 6.1~6.4
Body Material:Please refer to table1 Please refer to figure 3 for Operated Temp. &Pressure Range
Bonnet Type:STD type……-46℃～200℃; 200℃～300℃
Radiation fin type……300℃～530℃
(Please pay attention to the different Temp. &Pressure Range of material)
Packing Material:PTFE V-ring compound packing,graphite compound packing,
graphite packing,
Operating Temp. &Pressure range is shown in table 2,figure2
Seal Gasket:Spiral wound gasket(PTFE+316,Flexible Graphite+316),
Graphite with metal gasket(Graphite+316,Graphite+304)
Valve Trim
Plug Type:Perforated cylinder plug
Flow Characteristic:EQ%,Linearity (Please refer to figure4)
Trim Material:Please refer to table 3 for STD material assembly,operated Temp. &Pressure Range
Actuator
Type:Multi-spring diaphragm
Air Supply:Max. 6bar
Ambient Temp.:-20℃~+80℃
Spring range:As shown in Table 5.1～5.4
Air Connection:G1/8(SA1)；G1/4(SA2)；G3/4(SA3)
STD Specification:As shown in Table 5.1～5.4
Accessory
Positioner,Filter-regulator valve,Solenoid valve,Limit switch,
Valve position Transmitter,Booster relay,Lock-valve,Handwheel,etc.
Action
Air to open,Air to close
Performance
Range ability:50:1
Seat leakage:Metal seal is according to ANSI B16.104 ClassⅣ,ClassⅤ
Hysteresis:3%(Without Positioner) 1%(With Positioner)
Linearity:±5%(Without Positioner) ±1%(With Positioner)
Rated CV:As shown in table 4
Allowable pressure differential:As shown in table 5.1~5.4
Figure Size:As shown in figure5.1,5.2,table 6.1~6.4
Weight of product:As shown in table 6.1~6.4
Specifications:
○Special inspection
Flow characteristic test,material test,low temperature test,steam test,non-damages test
○copper-free treatment
○non-standard painting
○dust and sand proof
○vacuum service
○tropical area proof
○completely oil-free,water-free treatment
○special air piping and fitting
○strong corrosion proof
○stainless steel bolt and nut for exposed parts
○cold area proof
Other supplier products
|
|
Multihole plug single seat cage type control valve |
Multihole plug single seat cage type control valve is the furthest common control valve type, simple structure,are used for strict sealed close sit... |
|
|
Pneumatic Bellows Seal Single-Seated Regulating Valve |
Information
ZXPV pneumatic bellows seal single-seated regulating valve:1) It is of compact configuration, light weight, motion agility, and bulky ... |
|
|
Stainless Steel Pneumatic Ball Valve |
Information
1) Specification: DN15-50
2) Standard: DIN
3) Material: Stainless steel 304, 316L
4) Applications: Pharmacy, beer, food, petrole... |
|
|
Perforated Plug Low Noise Type |
SCN is remodel product of SGC. The series are dedicated specifically for low noise
and critical anti-cavitation applications on liquid, gas or ste... |
|
|
Pneumatic Low-temperature Angle Control Valve |
Detailed Product Description
Characteristics
ZXSD Pneumatic Low-temperature Angle Control Valve is a kind of control valve suitable for cold occ... |
All supplier products
Same products
