AG-01 Magnetic Cylinder Pneumatic Reed Switch Sensor
AG-01 series pneumatic cylinder reed switch sensor
The new AG-01 pneumatic reed switch sensor series is suitable for AIRTAC 4.35*4.5 square grooves, which can replace the DS1-G of AIRTAC; the embedded stainless steel nut strengthens the structural strength, making the AG-01 reed switch in pneumatic cylindersseries more suitable for organic solvents or strong corrosiveness.
AG-01 Magnetic Reed Switch For Pneumatic CylinderSpecifications
|
Model |
AG-01 DF |
AG-01 N |
AG-01 P |
|
Switching Logic |
Normally Open |
Solid State Output, Normally Open |
|
|
Output Type |
2 Wire Solid State |
NPN Current Sinking |
PNP Current Sinking |
|
Voltage Range |
10～30V DC |
5～30V DC |
|
|
Sensor Current |
1～50 mA |
0～100 mA |
|
|
Switch Rating |
3W Max. |
||
|
Consumption |
/ |
3 mA Max.@24V |
|
|
Voltage Drop |
|||
|
Leakage Current |
90 μA Max.@28V |
||
|
Indicator |
Red LED |
Red LED |
Green LED |
|
Cable |
Φ2.8, 2C, Grey Oil-Resistant PVC |
Φ2.8, 3C, Grey Oil-Resistant PVC |
|
|
Sensitivity |
40～800 Gauss |
40～800 Gauss |
|
|
Sensor Frequency |
900Hz |
900Hz |
|
|
Temperature |
-10～70℃ |
-10～70℃ |
|
|
Shock |
50G |
50G |
|
|
Vibration |
9G |
9G |
|
|
Ingress Protection |
IP68 (GB/T4208-2017) |
IP68 (GB/T4208-2017) |
|
|
Protection Circuit |
Surge Suppression |
Power Reverse Polarity; Surge Suppression |
|
|
CE Certificate NO. |
E8A 17 04 53334 007 |
E8A 17 04 53334 008 |
|
|
CNEx Certificate NO. |
|||
|
RoHS 2011/65/EU & (EU) 2015/863 |
|||
|
Reach NO. |
(EC) N 1907/2006 (REACH) |
||
How Does a Reed Switch Sensor for Cylinder Function?
Send product request
Other supplier products
 |
PD Adjustable Sensor Mounting Brackets | Special for DFGE/AG-39 series, PD Adjustable Sensor Mounting Bracketsare fixed to profile cylinder below φ100. PD Adjustable Sensor Brackets... |
 |
PC Sensor Connector | Special for DFGH/AG-26/AG-27 series, PC adapter can be matched with clamp/steel belt Fixed to various types of cylinders. Specification of 3 pin... |
 |
AG-09 Magnetic Cylinder Sensor | AG-09 series switch magnetic sensor The new AG-09 series is suitable for AIRTAC 7.1*3.2 L-slot cylinder and can replace AIRTAC DS1-J. The casing is... |
 |
PCF Sensor Bracket | 18mm Sensor Mounting Bracket For AG-49/AG-59 series only, PCF Bracket is fixed to the tie rod cylinder below φ250～φ320. 18mm Sensor B... |
 |
PO Sensor Bracket | Proximity Sensor Mounting Special for AG-49/AG-59 series, PO Bracket is fixed on the profile cylinder of φ32～φ100. Specification of PO Se... |
Same products
 |
"China manufacturer power supply VM-5H3 for power generation | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China manufacturer power supply VM-5H3 for power generation Is to use the generator sets of prof... |
 |
china manufacturer flowmeter D2-FA65-65C/RL for power generation | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China manufacturer flowmeter D2-FA65-65C/RL for power generation Is to use the generator sets of... |
 |
proximity switch Ni10-K20-Y1 power plant spare parts | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China supplier proximity switch Ni10-K20-Y1 power plant spare parts Dongfang Yoyik is specializi... |
 |
China supplier Pull Switch HKLS-ll power plant spare parts | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China supplier Pull Switch HKLS-ll power plant spare parts YOYIK produced by the development of ... |
 |
ABB Bailey Analog Input Module IMASI13 | Seller: 840499 | Monitoring process variables such as temperature, pressure, flow, and level Interfacing with se... |
