Polarizing Beamsplitter (PBS) or Non-Polarizing Prism
These cubes split the energy with minimal polarization sensitivity. The polarization states are about the same for the entrance and exit beams.
Broadband Non-Polarizing Beamsplitter Cube's hybrid coating has certain absorption but minimal polarization sensitivity. Due to the metallic nature of the hybrid coating, those cubes are not intended for use with high powerlasers.
Polarizing Beamsplitter Cube
A polarizing beamsplitter cube consists of two right angle prisms cemented together. The hypotenuse face of one prism is coated with a special multilayer dielectric coating. When circularly polarized or natural light enter the cube vertically, it separated into two linearly polarized beams. The transmitted beam is P-polarized while the reflected beam is S-polarized.
And when a linearly polarized light come in, it similarly divided into two beams. But the energy ratio of the two outgoing beams is depending on the polarization of the incident beam. Polarizing beamsplitter cubes are available for many laser wavelengths and broadband ranges.
Standard Beamslitter Cube
A Standard Beamsplitter Cube is independent of polarization. The incoming light should be: 45°linearly polarized, circularly polarized or natural light. The outgoing beams are two partially polarized beams of about the equal intensities.
Send product request
Other supplier products
 |
BK7 Windows | BK7 window is the most common type of window. It has good performance over visible and near infrared wavelength region. At the same time,BK7 window... |
 |
Right Angle Prisms | Right angle prism is the most widely used prisms. It utilizes the inherent total internal reflection (TIR) at the hypotenuse to invert the image an... |
 |
Achromatic Lens | An achromatic lens is alens that is designed to limit the effects of chromatic and spherical aberration，and is corrected to bring two wavelengths (... |
 |
Meniscus Lens | One side of meniscus lens is convex, another side is concave. It can be a convergent lens or a divergent lens, which is decided together by refract... |
 |
Double-Concave Lens | A double-concave lens is compose of two concave surface, has a negative focal length and are best used to diverge a converging beam. Similar to a p... |
Same products
 |
Microscope Objective Lens | Seller: Shenzhen Canrill Technologies Co., Ltd | Microscope Objective Lens Suitable for ITO, particle detection, wafer inspection Infinity opt... |
 |
DMD Lithography Lens | Seller: Shenzhen Canrill Technologies Co., Ltd | DMD Lithography Lens We have been in close cooperation with LDI (Laser Direct Imaging) manufactu... |
 |
8k Line Scan (57.4mm) Telecentric Lens | Seller: Shenzhen Canrill Technologies Co., Ltd | 8k Line Scan Lens Suitable for large format Area Scan Camera Line Scan Camera 16Kx3.5μm, 8Kx7... |
 |
16k Line Scan (82mm) Telecentric Lens | Seller: Shenzhen Canrill Technologies Co., Ltd | 16k Line Scan (82mm) Telecentric Lens Specially designed for large image circle up to 82mm in le... |
 |
Achromatic Lens | Seller: TianCheng Optics CO.,Ltd | Achromatic Lensfor Sale An achromatic lensis a lens that is designed to limit the effects of chr... |
