FST500-202 final manufacturer Easily setting electrical pressure switch for water pump
Product Introduction
The FST500-202 Electronic Pressure Switch Can provide a continuous pressure monitoring and set the pressure switching point without supercharging. User can easily set the switching point and back-to-switching point without supercharging equipment. And can define the switch type (normal open/close), damping time, the relay and NPN / PNP switch. The overload is from several uA to 500mA. The product can transfer the collected pressure signal into standard current and pressure signal output. The display and connection can rotate freely within 330 degrees so that it can be easily installed.
ApplicableScope
- Gas-liquid dual-capable can be used in : pump control, storage tank monitor, liquid level control, filter blocking and monitor, leakage surveillance.
- Industrialprocesstestingandcontrol
- Self-controlledandconstant-pressuredwatersupplyinbuilding
- Petrochemical,environmentalprotection,waterconservancy,lightindustry,machinery,metallurgy
- Measuringandcontrolinothersystems
Technical Index
|
Project |
Parameter |
|
|
Standardrange |
Pressuretype:gaugepressure,absolutepressure. |
|
|
PressureRanges(bar):11.62. |
||
|
PressureRanges(psi):K1.5K3K5K10K |
||
|
TechnicalIndex |
Accuracy |
±0.3%FS±0.5%FS |
|
PressureAdjust |
0%~100%FS |
|
|
Hystersisadjust |
0%~40%FS |
|
|
ControlOutput |
PNP,NPN/Relay |
|
|
SignalOutput |
4~20mA/0~10VDC |
|
|
Supplyvoltage |
12~30VDC |
|
|
MediumTemperature |
-30°C~+85°C |
|
|
EnvironmentTemperature |
-20°C~+85°C |
|
|
LongtermStability(oneyear) |
±0.1%FS |
|
|
Overload |
200%FS |
|
|
TemperatureDrift |
±0.1%FS/10°C |
|
|
Housing |
304stainlesssteel |
|
|
Connection |
316Lstainlesssteel |
|
|
EnvironmentalProtection |
IP65 |
|
|
Pressureconnection |
M20×1.5G1/41/4NPT(male)orcustom-made |
|
Send product request
Other supplier products
 |
FST800-215 Explosion-isolated Pressure Transmitters and sensors for CNG | ProductIntroduction TheFST800-215explosion-isolatedpressuretransmitterisasiliconMEMSstraingaugesensorwhichisglassbondedtoastainlesssteeldiaphragm.... |
 |
FST800-225 LCD displayer Explosion isolated Pressure Transmitter for CNG LNG industry | Product Introduction FST800-225 Explosion-isolated industrial pressure transmitter is a high precision, high stability product with kinds of optio... |
 |
FST800-201 RoHS approved Universal Industrial Pressure Sensor, MEMS Pressure Sensors | ProductIntroduction FST800-201universalindustrialpressuresensorisasiliconMEMSstraingaugesensorwhichisglassbondedtoastainlesssteeldiaphragm.Itavoid... |
 |
FST700-101 submersible water level sensor for water well | FST700-101 Liquid-level transmitter is designed for diving level measurement. The sensitive element is the MEMS diffused silicon core. The whole pr... |
 |
FST800-211B Low price 4-20mA / 0-5V Ceramic Pressure Transmitter, Ceramic Pressure Transducer / sensor | Product introduction FST800-211B Ceramic piezo-resistive pressure transmitter is a ceramic piezo-resistive pressure-sensitive core which made by... |
Same products
 |
Temperature Transmitter | Seller: Beijing Gallop High& New Tech Co.,Ltd | Temperature transmitteradopts thermonuclear, RTD as temperature measuring element, the output sig... |
 |
Capsule Type Pressure Transmitter | Seller: Beijing Gallop High& New Tech Co.,Ltd | To convert measured pressure values into standard industrial signals, such as 4-20mA, 0-20mA, 0-5... |
 |
Allen-Bradley PLC Module 1769-IA16 | Seller: 840499 | Allen-Bradley PLC Module 1769-IA16 The Bulletin 1769 Compact I/O™ chassis-based modules ca... |
 |
Temperature & Humidity Transmitter | Seller: Tinko Instrument (Suzhou) Co., Ltd. | Tinko high temperature humidity transmitterare suitable for HAVC temperature and humidity measure... |
 |
TKSD Duct Mounted Transmitter | Seller: Tinko Instrument (Suzhou) Co., Ltd. | TKSD series temperature transmitter with displayare designed for indoor air temperature and humid... |
