Electrode Iron Powder
Iron; electrode on the impact of basic iron welding rod coating efficiency of each component of welding fume generation rate,Website:, the test was found to increase dramatically the amount of dust with the rod electrode coating in CaCO3 MgCO3, increase, CaF2 content, CaF2 of by dust rate is greater than CaCO3 and MgCO3, the electrode increases the amount of dust coating the TiO2 content gradually decreases. in order to improve the toughness of the weld metal, focusing on the effects of chemical composition on the toughness of the weld, the study found w (Mn ) content of the good toughness can be obtained when 1.1% to 1.5%, while the Si content increases, toughness decreased, the general should be controlled at 0.55% or less by adding Ni to weld and B, Ti composite role, low temperature impact toughness of the weld can be further improved
Other supplier products
|
Ferrovanadium Powder |
Vanadium iron: obtained by reduction of iron and titanium master alloys (iron-vanadium binary alloy), the vanadium content of not less than 35.0% (... |
|
Ferrosilicon Powder |
Alloy of iron and silicon, and then through the ground into powdery substance, used in steelmaking, ironmaking deoxidizer, may be used as raw mater... |
|
Absorbing Material Iron Powder |
Application direction1 Absorbing materials: metal nano iron powder has special absorption effects in the electromagnetic wave.Iron,cobalt,zinc oxid... |
|
Sintered Carbide Tools |
Carbide material is an alloy of a refractory metal bonded hard metal compound by powder metallurgy process.Cemented carbide has high hardness, wear... |
|
IRON CORE Iron Powder |
Iron core is a magnetic iron oxide in the popular view, mainly used in electrical circuits to solve the electromagnetic compatibility (EMC) issues.... |
All supplier products
Same products