CARBIDE ROLLER
Due to the high thermal conductivity of the cemented carbide, carbide rollerhas good heat dissipation, which shortens the time of the roll surface at high temperature, so the high temperature reaction time of the roll with the harmful impurities in the cooling water is short. Therefore, the cemented carbide roller is more resistant to corrosion, cold fatigue and hot fatigue than the tool steel roller.
According to the structure, cemented carbide roll rings(carbide roller) can be divided into solid cemented carbide roll rings and combined cemented carbide roll rings. The solid cemented carbide roll has been widely used in the frame of pre-finishing rolling and finishing rolling (including the sizing and reducing frame, pinch roll frame) of high-speed wire rod mill. The combined cemented carbide roll is composed of cemented carbide and other materials, there are combined carbide roll rings and combined carbide rolls. The combined cemented carbide roll ring is installed on the roll shaft, while the combined cemented carbide roll directly casts the cemented carbide roll ring in the roll shaft to form a whole, which is applied to the rolling mill with large rolling load.
Due to the high thermal conductivity of the cemented carbide, tungsten carbide rollerhas good heat dissipation, which shortens the time of the roll surface at high temperature, so the high temperature reaction time of the roll with the harmful impurities in the cooling water is short. Therefore, the cemented carbide roller is more resistant to corrosion, cold fatigue and hot fatigue than the tool steel roller.
According to the structure, cemented carbide roll rings(carbide roller) can be divided into solid cemented carbide roll rings and combined cemented carbide roll rings. The solid cemented carbide roll has been widely used in the frame of pre-finishing rolling and finishing rolling (including the sizing and reducing frame, pinch roll frame) of high-speed wire rod mill. The combined cemented carbide roll is composed of cemented carbide and other materials, there are combined carbide roll rings and combined carbide rolls. The combined cemented carbide roll ring is installed on the roll shaft, while the combined cemented carbide roll directly casts the cemented carbide roll ring in the roll shaft to form a whole, which is applied to the rolling mill with large rolling load.
As one of the most professional carbide tool manufacturers, Xiamen Betalent Carbide Co., Ltd provides tungsten carbide products, carbide tool, tungsten carbide rods for sale, etc. Contact us to know more.
Send product request
Other supplier products
 |
2 FLUTE, 0.6 MM BALL NOSE END MILL, SMALL DIAMETER MILL CUTTER | 2 FLUTE, 0.6 MMENDMILL, SMALL DIAMETER MILL CUTTER Grain size Cutting dia. Grade BT55 Shank dia.... |
 |
CEMENTED CARBIDE | Cemented carbide materialis a kind of alloy material which is made of hard compounds of an insoluble metal and binder metal by powder metallurgy pr... |
 |
CARBIDE ROD | Carbide rod of which tungsten carbide grain size ranges from 0.2micron to 0.8micron, cobalt content ranges from 6% to 12%, hardness ranges from 91.... |
 |
TUBE DRAWING DIE BLANK | Betalent carbide offers carbide grades special for tube drawing dieand inner plug, all tube drawing dies, and plugs are customized according to dr... |
 |
PILOT DRILL BIT | Xiamen Betalent Carbide Co., Ltd is a professional carbide products inc, focusing on designing, producing, and selling cemented carbide materials a... |
Same products
 |
4 FLUTE, 0.2 MM FLAT CARBIDE END MILL, SMALL DIAMETER MILL CUTTER FOR STAINLESS STEEL | Seller: Xiamen Talent Carbide Co.,Ltd | 4 FLUTE, 0.2 MM END MILL, SMALL DIAMETER MILL CUTTER FOR STAINLESS STEEL ... |
 |
3 FLUTE, 16MM FLAT CARBIDE END MILL, MILL CUTTER FOR ALUMINUM | Seller: Xiamen Talent Carbide Co.,Ltd | 3 FLUTE, 16MM CARBIDE END MILL, MILL CUTTER FOR ALUMINUM Grain size Cut... |
 |
2 FLUTE, 5MM BALL NOSE END MILL, SMALL DIAMETER MILL CUTTER | Seller: Xiamen Talent Carbide Co.,Ltd | 2 FLUTE, 5MM END MILL, SMALL DIAMETER CARBIDEMILLINGCUTTERS Grain size ... |
 |
2 FLUTE, 18MM FLAT CARBIDE END MILL, MILL CUTTER | Seller: Xiamen Talent Carbide Co.,Ltd | 2 FLUTE, 18MM END MILL, MILL CUTTER Grain size Cutting dia. 18... |
 |
2 FLUTE, 0.8 MM BALL NOSE END MILL, SMALL DIAMETER MILL CUTTER | Seller: Xiamen Talent Carbide Co.,Ltd | 2 FLUTE, 0.8 MMENDMILL, SMALL DIAMETER MILL CUTTER Grain size Cutti... |
