High-Density Compounds
High-density plastic has a density of up to 13g/cm3 by adding high-density powder to the plastic matrix, which is higher than that of ordinary metal. It can be used as a shielding enclosure for high-energy rays, counterweight material, substitute material for lead, etc.
Properties of Soft Magnetic Bonded Compounds
Less production process and suitable for automatic production
The product is energy-efficient and harmless to the environment
Applications of Soft Magnetic Bonded Compounds
Counterweight material (counterweight of automobile, imitation gun, golf equipment, etc.); Medical industry.
Specification of High-density Compounds and Metal Bonded Plastic
Grade |
HAA |
HCA |
HWA |
||
Resin Binder |
PA6 |
||||
Mechanical Properties |
Tensile Strength |
MPa |
55 |
60 |
66 |
Flexural Strength |
MPa |
100 |
105 |
112 |
|
Physical Properties |
Mold Density |
g/cm3 |
2 |
10 |
|
Melt Flow Rate |
g/10min |
132 |
145 |
155 |
|
HDT |
℃ |
150 |
150 |
150 |
|
Thermal conductivity |
W/(m·K) |
||||
Mold Shrinkage Rate |
% |
||||
Injection Parameters |
Pre-drying Temp |
℃ |
80-110 |
80-110 |
80-110 |
Pre-drying Time |
hr |
||||
Barrel Temp |
H1 ℃ |
260-270 |
260-270 |
260-270 |
|
H2 ℃ |
270-280 |
270-280 |
270-280 |
||
H3 ℃ |
275-285 |
275-285 |
275-285 |
||
Mold Temp |
℃ |
80-90 |
80-90 |
80-90 |
|
Pressure |
bar |
65-80 |
65-80 |
65-80 |
|
Speed |
V% |
60-80 |
60-80 |
60-80 |
Chase Technology is a market-oriented comprehensive technology company, we provide ferrite compound, Hard Magnetic Bonded Compounds, Soft Magnetic Bonded Compounds, hard magnet and soft magnet, Magnet Solutions, best material for magnet, high gravity compounds, Ferrite bonded magnetand so on. Want to know more? Please contact us.
Send product request
Other supplier products
Hybrid Bonded Magnetic Compounds | Hybrid Bonded Magnetic Compounds Introductions: By mixing different kinds of magnetic powder in different proportions, we can obtain a series of hy... | |
Soft Magnetic Bonded Compounds | As a new material, soft magnetic compoundcan be used for extrusion or injection molding and are especially suitable for high-frequency high-speed s... | |
Hard-Ferrite Bonded Magnetic Compounds | Light density and low cost of ferrite bonded magnetic compounds(hard ferritesmagnets) create a high-cost performance. Therefore, it has the largest... | |
Magnetic Solution For Famous Customers | We can provide customers with appropriate mold design scheme (magnetic circuit design and mold-flow analysis) and optimization processing parameter... | |
Hard-Ferrite Bonded Magnetic Compounds | Compared to rare earth magnetic materials, bonded ferrite magnets have obvious cost advantage due to the use of cheap strontium oxide, barium oxide... |
Same products
Magnetic Core | Seller: Shenzhen Magnetic Cube Technology Co.,Ltd. | A Magnetic Coreis a device used for storing and transforming electromagnetic energy. Made primari... | |
Rubber Coated Magnets | Seller: NingBo BeiLun Meank Magnetics Co.,ltd. | The application of permanent magnets is increasing rapidly day by day, especially neodymium (NdFe... | |
Plastic Coated Magnets | Seller: NingBo BeiLun Meank Magnetics Co.,ltd. | Plastic coated magnetsalso called as plastic covered magnets or plastic encased magnets.They are ... | |
Neodymium Cube Magnets | Seller: NingBo BeiLun Meank Magnetics Co.,ltd. | Cube magnets(cubic magnets) are special block magnets, which have the same sizes for length, widt... | |
Neodymium Blocks/Rectangle Magnets | Seller: NingBo BeiLun Meank Magnetics Co.,ltd. | Block magnets can be called as magnet blocks, rectangle magnets, rectangular magnets and square m... |