Sintered Neodymium Magnets
Sintered neodymium magnetis the strongest magnetic material commercially available today. It is largely made of alloy of neodymium, iron and boron, and the chemical formula is Nd2Fe14B. Sintered NdFeB neodymium magnet exhibits high magnetic energy product in small size with high coercive forces. Examples of applications include permanent magnet motors, loudspeakers, magnetic separators, wind power generators, computer hard drive, and MRI devices.
For more technical information of our sintered neodymium magnet, please refer to the sections of Technological Advantages, Demagnetization Curve, Grades, Magnetic Properties, Physical Properties, Magnetic Parameters, Surface Treatment, Magnetization Orientations.
Technological Advantages
High Coercive Force
Highest Intrinsic coercive force Hcj≥35kOe
High Consistency
CPK of Remanence (Br) and Intrinsic coercive force (Hcj)>1.67
Low Reversible Temperature Coefficient
αBr=-0.08%/℃, βHcj=-0.4%/℃
Low Weight Loss
130℃, humidity 100%, vapor pressure 2.7bar, 20days, average weight loss<2mg/cm2
Grades
The Grade of a magnet generally indicates how "strong" a magnet material is, which is measured by the Maximum Energy Product. The energy product is commonly specified in units of Gauss Oersted. The higher the grade the "stronger" the magnet. The grade also tells the temperature rating of a magnet material. Neodymium magnets have different heat tolerances which determine their maximum working temperature. As the heat tolerance increases the maximum available flux density decreases.
Magnetization Orientations
Magnets can be delivered magnetized and un-magnetized. Some production methods require the magnets being incorporated into assemblies in a un-magnetized state and magnetized later once the assembly is completed. There are various magnetic orientations available for different shapes of magnets.
Send product request
Other supplier products
Rubber Coated Magnets | Rubber Coated Magnets Material Sintered Neodymium Iron Boron, Rubber, Steel Dimensions Round / Rectangular Customi... | |
Threaded Magnets | Threaded Rod Magnets Material Sintered Neodymium Iron Boron, Steel Dimensions Diameter Pull Force 5 lbs... | |
Hook Magnets | Material SinteredNeodymiumIronBoron,Steel Dimensions Diameter PullForce 12lbs—900lbs MagnetizationOrientation Axial ... | |
Generator Permanent Magnet 2/3 inch x1/2 inch x1/4 inch N42 Neodymium Block Magnet Magnetic Plate | This powerful neodymium block magnets measures 2/3" in length, 1/2"in width, and 1/4" in thickness, with the pull force of 15.95 lb vertically. It ... | |
N42SH ARC Neodymium Magnet OD1.5 inch xID1.25 inch x0.75 inch Lx90 Degree ID N Pole | N42SHARC Neodymium Magnet OD1.5 inch xID1.25 inch x0.75 inch Lx90 Degree ID N Pole Similar Products Nickel Coated N33EH Neodymium Magnet Segment ... |