Metallurgical Silicon carbide black 1-2mm 1-3mm
Metallurgical Silicon carbide black 1-2mm 1-3mm
Product Introduction
Black silicon carbide (SiC) is also called black carborundum. It is a non-metallic material made from Petroleum coke and silicon sand by melting in a high-temperature resistance furnace. The main application of black silicon carbide in cast iron & ductile iron foundry is deoxidizer due to its high refractory stability, good thermal stability, high-temperature slag resistance, and good deoxidization and reduction properties. Adding silicon carbide to the iron before casting can improve the performance and quality of cast iron. Usually, 85-90% silicon carbide is suitable for the casting of gray cast iron, and 97-98% silicon carbide is suitable for the casting of ductile iron.
The melting point of silicon carbide is as high as 2700℃. During the process of melting cast iron in an induction furnace, it does not melt in high-temperature molten iron, but rather mix in cast iron. The addition of black silicon carbide can improve the carbon equivalent, serve as a Oxygen scavenger to strengthen the reducibility of molten iron. It can prevent carbide precipitation, improve the compactness of cast iron, increase the graphite spheroidization rate of nodular cast iron. Thus, adding carborundum can improve the quality of cast iron.
The fuctions of black silicon carbide particles in ductile iron casting:
Physical properties of Black silicon carbide F16/F20 for ductile iron foundry
|
Hardness: |
Mohs:9.2, Vicker :28-32 GPa |
|
Melting Point: |
dissociated at about 2300 °C |
|
Maximum service temperature: |
1900℃ |
|
Specific Gravity: |
|
|
Bulk density(LPD): |
|
|
Color: |
Black |
|
Particle shape: |
Hexagonal |
|
Modulus of Elasticity |
58-65x106 psi |
|
Coefficient of Thermal Expansion |
|
|
Thermal Conductivity |
71-130 W/MK |
Chemical contents of Black silicon carbide F16/F20 for ductile iron foundry
|
Item |
Content |
|
SiC |
|
|
SiO2 |
|
|
H2O3 |
|
|
Fe2O3 |
|
|
F,Si |
Other specifications of black silicon carbide for foundry & refractory:
|
SiC purity |
Fe2O3 |
Moisture |
||
|
SiC86 |
≥ 86% |
≤2.4% |
≤ 2.0% |
≤ 0.2% |
|
SiC88 |
≥ 88% |
≤ 2.3% |
≤ 2.0% |
≤ 0.2% |
|
SiC90 |
≥ 90% |
≤ 2.0% |
≤ 1.8% |
≤ 0.2% |
|
SiC92 |
≥ 92% |
≤ 1.8% |
≤ 1.7% |
≤ 0.2% |
|
SiC93 |
≥93% |
≤ 1.8% |
≤ 1.6% |
≤ 0.2% |
|
SiC95 |
≥ 95% |
≤ 1.0% |
≤ 1.3% |
≤ 0.2% |
|
SiC97 |
≥ 97% |
≤ 0.8% |
≤ 1.2% |
≤ 0.2% |
|
≥97.5% |
≤ 0.8% |
≤ 0.9% |
≤ 0.2% |
|
|
SiC98 |
≥ 98% |
≤ 0.5% |
≤ 0.5% |
≤ 0.2% |
Black silicon carbide particle sizes for foundry & refractory:
Macro grit and grain:F12,F14,F16,F20,etc.
Fraction:1-3mm 0-10mm,0-5mm,1-10mm,1-5mm, etc.
Send product request
Other supplier products
 |
Green silicon carbide SiC powder 63C F320 F360 | Green silicon carbide SiC powder 63C F320 F360 Green silicon carbide powder is a very hard abrasive material with uniform particle size distribu... |
 |
Green silicon carbide 64C F1500 2.5MKM | Green silicon carbide 64C F1500 2.5MKM Green silicon carbide powder is a very hard abrasive material with uniform particle size distribution. Th... |
 |
Silicon carbide 53C 54C F030 F036 for marble blasting | Black Silicon carbide Grain is an extremely hard and 99% SiC carborundum grit. As an abrasive material, it can work well for abrasive blasting, sur... |
 |
Green silicon carbide 63C F150 | Green silicon carbide grit Green silicon carbide grit is a very hard abrasive material . The hardness of itonly ranks after diamond and B4C, and it... |
 |
Ceramic shot blasting media B60 B80 | Ceramic shot blasting media B60 B80 The main component of ceramic shot is zirconia, which is mainly used for surface treatment such as sand blas... |
Same products
 |
Molybdenum Tube | Seller: Beijing Huasheng Metal Materials Co., Ltd | Molybdenum tubehas high melting point, high strength, good thermal conductivity, high temperature... |
 |
Ferro Tungsten | Seller: Beijing Huasheng Metal Materials Co., Ltd | HSG METAL, as one of ferro tungsten suppliers, provides ferro tungsten for sale. Ferrotungsten... |
 |
Ferro Niobium | Seller: Beijing Huasheng Metal Materials Co., Ltd | Ferroniobium an iron alloy with niobium and iron as its principal components. It also contains im... |
 |
Ferro Molybdenum | Seller: Beijing Huasheng Metal Materials Co., Ltd | Ferro molybdenum is a ferroalloy composed of molybdenum and iron, generally containing 50-60% mol... |
 |
Ferro Alloy | Seller: Beijing Huasheng Metal Materials Co., Ltd | Ferroalloy is a general term for alloys composed of iron and silicon, manganese, chromium, titani... |
