Parts Of Control Unit CG08

Electrical data OptiStar CG08(-C)Nominal input voltage100-240 VACFrequency50-60 HzConnected load40 VANominal output voltage (to the gun)12 VNominal output current (to the gun)1.2 ATemperature range0°C - +40°C (+32°F - +104°F)Max. surface temperature85 °C (+185 °F)Pneumatic dataCompressed air connectionQuick couplingInput pressure (must be set in the system parameter P2)5.5 bar 6.0 bar 6.5 barMax. input pressure10 bar / 145 psiMin. input pressure (while unit in operation)5.5 bar / 80 psiMax. water vapor content of the compressed air1.3 g/m³Max. oil vapor content of the compressed air0.1 mg/m³ CG08(-C) – Front plate and power pack  Front plate - complete (pos. 1-12)                                          1009 860  Front plate with foil keyboard (pos. 5-8)                                   1009 859  1 OptiStar Mainboard V2.0 - complete                                        1009 844  2 Spacer sleeve - Ø 3.1/6x15 mm  3 PCB Powerboard V2.0                                                       1009 865  4 Spacer sleeve - Ø 3.2/6x7 mm  5 Front frame - complete (incl. pos. 5.1)                                   1007 048  5.1 Special screw                                                           1007 019  6 Special screw – M4x20/7 mm                                               1003 000  7 Front plate gasket                                                        1007 042  9 Spacer sleeve - Ø 3.6/7x5 mm  10 Display                                                                  1007 044  11 Washer - Ø 3.2/7x0.5 mm  12 Locknut - M3  13 Power pack - 24 VDC                                                      1009 849 CG08(-C) – inside rear wall  1 Rear panel gasket                                                    1007 033  2 CAN-Bus Modul – komplett (nur CG08-C)                               1009 068  3 Elbow plug-in connection - Ø 8-Ø 8 mm                                230 995  4 Solenoid valve - Ø 8-Ø 8 mm, NW 3.4, 24 VDC                          1003 914  5 Motor throttle - complete                                            1000 064  6 Plastic tube - Ø 8/6 mm                                              103 152*  7 Fluidizing pad - 1/8"a                                               237 264  8 Cap screw - M4x16 mm                                                 216 801CG08(-C) connections  1 Quick release connection – NW5, Ø 6 mm                                   200 840  1.1 Hose - Ø 6/4 mm                                                         103 144*  2 Nut with kink protection – M12x1 mm, Ø 8 mm                              201 316  2.1 Supplementary air hose - Ø 8/6 mm (black)                               103 756*  2.2 Quick release coupling for supplementary air hose - NW5-Ø 8 mm          261 637  3 Nut with kink protection – M12x1 mm, Ø 8 mm                              201 316  3.1 Conveying air hose - Ø 8/6 mm (red)                                     103 500*  3.2 Quick release coupling for conveying air hose - NW5-Ø 8 mm              261 645  4 Quick release connection – NW 5 mm                                       1004 272  4.1 Hose - Ø 8/6 mm                                                         103 756*  5 CAN bus cable – 0.5 m (CG08-C only)                                      1002 655  CAN bus cable – 4.5 m (CG08-C only)                                        387 592  CAN bus cable – 5.5 m (CG08-C only)                                        388 521  CAN bus cable – 6.0 m (CG08-C only)                                        388 530  6 Bus terminal resistor (not shown) (CG08-C only)                           387 606  7 Mains cable – 4.5 m                                                      1002 563

Other supplier products

	Parts Of Manual Spray Gun GM02	GM02 Electrical dataNominal input voltage10 V eff.Frequencyca.18 kHzNominal output voltage100 kVPolaritynegative (optionally positive)Max. output c...
	GM03 Manual Powder Coating Gun	Electrical data Nominal input voltageeff.10 VFrequency18 kHz (average)Nominal output voltage100 kVPolarityNegative  (Galinonal positive)Max. output...
	Electric Heating Oven	Electric Powder Curing Ovens  - Sheeted inside and outside with galvanized sheet metal  - Inside the thickness of rock wool board 120MM,Insulat...
	Parts Of Control Unit CG03	TECHNICAL DATA OPTITRONIC(CG03) - BASIS MODEL Mains connection:Input voltage90-264 VACPower consumption48 VAFrequency47-463 HzTemperature range0°C ...
	Galin Injector	Injector Unit1.Its output of powder is bigger than that pf existing injector.2.Powder can easily penetrate every corner during powder coating.3.Inj...

All supplier products

Same products

	BP2 U-shaped Aluminum Clip Packaging Sealing Clips Sausage Casing Clipping Machine	Seller: Shijiazhuang Lukuan Machinery CO.,Ltd	Company Name: Lukuan Machinery Place of Origin: China Application: Food or bag packaging Size: 14...
	BP1 U shaped aluminum sausage clips for sausage casing	Seller: Shijiazhuang Lukuan Machinery CO.,Ltd	Company Name: Lukuan Machinery Place of Origin: China Application: Food or bag packaging Shape: U...
	Hard-Seal Ball Valve Packing Set, 60*50 mm, Graphite, TA-Luft	Seller: Magpie Valve Packing Gasket Co., Ltd	The Hard-Seal Ball Valve Packing Set Plant delivers a premium sealing solution purpose-built for ...
	Sale Aluminum Foil Jumbo Rolls, suitable for closures, yogurt lids, pharmaceutical and food packaging	Seller: Henan Hongchang Aluminum Co., Ltd.	Aluminum foil, with its outstanding barrier properties, excellent formability, and compliance wit...
	Disposable Paper Boxes for Food	Seller: Zhejiang Richpak Technology Co., Ltd.	Suitable for your grab-and-go restaurant, deli, convenience store, or catering business, these bo...