dril-collar
Non-magnetic Drill collars are made from Non-magnetic steel bars with low-strength by combining a proprietary chemical analysis and a rotary hammer forging process with low magnetic permeability excellent machine ability, it will not interfere with the specialized directional equipment and will enhance the performance of the drilling operation.
Non-mag drill collars function as housing for the MWD tools, while at the same time provide the weight for drillstring. non-mag drill collars are suitable for all types of drilling including straight and directional applications.
Each drill collar is fully inspected by internal inspection dept. All data obtained are recorded on the inspection certificate furnished with each drill collar. API monogram, serial number, OD, ID, type and size of connections are stamped on recessed mill flats.
We can provide three type of non magnetic drill collar according to the customers’ order; include Slick, Spiral, and Flex Non-Mag Drill Collar.
Slick Non-Mag Drill Collar
Slick Non-Mag Drill Collar provide the required weight on bit, and will not interfere with the directional drilling ability.
Spiral Non-Mag Drill Collar
Spiral Non-Mag Drill Collar is designed to allow greater flow area for drilling fluids, while providing the benefits of non-mag steel for complex drilling programs.
Flex Non-Mag Drill Collar
Flex Non-Mag Drill Collar is thinner and more flexible than standard drill collar. Their ability to make short radius turns, bend for high build angles, and pass through severe doglegs makes them ideal for use in directional and horizontal applications. Manufactured with non-mag steel, this drill collar is well suited for housing MWD equipment.
Drill Collar is mainly used to provide bit weight to drill bit so that drill pipe is in tension. Especially drill collar can keep drill bit centralized and hole track by large rigidity. drill collars are manufactured strictly from API Spec7-1 and SY5411 standard.
Technical specifications and parameters
|
DrillCollarNumber |
O.D. |
I.D. |
Length |
BevelDiameter |
RefbendgStrengthratio |
||
|
(mm) |
(in) |
(mm) |
(in) |
||||
|
NC23-31 |
79.4 |
31/8 |
31.8 |
11/2 |
9150 |
76.2 |
2.57:1 |
|
NC26-35(23/8IF) |
88.9 |
31/2 |
38.1 |
11/2 |
9150 |
82.9 |
2.42:1 |
|
NC31-41(27/8IF) |
104.8 |
41/8 |
50.8 |
2 |
9150 |
100.4 |
2.43:1 |
|
NC35-47 |
120.6 |
43/4 |
50.8 |
2 |
9150 |
114.7 |
2.58:1 |
|
NC38-50(31/2IF) |
127.0 |
5 |
57.2 |
21/4 |
9150 |
121.0 |
2.38:1 |
|
NC44-60 |
152.4 |
6 |
57.2 |
21/4 |
9150&9450 |
144.5 |
2.49:1 |
|
NC44-60 |
152.4 |
6 |
71.4 |
213/16 |
9150&9450 |
144.5 |
2.84:1 |
|
NC44-62 |
158.8 |
61/4 |
57.2 |
21/4 |
9150&9450 |
149.2 |
2.91:1 |
|
NC46-62(4IF) |
158.8 |
61/4 |
71.4 |
213/16 |
9150&9450 |
150.0 |
2.63:1 |
|
NC46-65(4IF) |
165.1 |
61/2 |
57.2 |
21/4 |
9150&9450 |
154.8 |
2.76:1 |
|
NC46-65(4IF) |
165.1 |
61/2 |
71.4 |
213/16 |
9150&9450 |
154.8 |
3.05:1 |
|
NC46-67(4IF) |
171.4 |
63/4 |
57.2 |
21/4 |
9150&9450 |
159.5 |
3.18:1 |
|
NC50-67(41/2IF) |
171.4 |
63/4 |
71.4 |
213/16 |
9150&9450 |
159.5 |
2.37:1 |
|
NC50-70(41/2IF) |
177.8 |
7 |
57.2 |
21/4 |
9150&9450 |
164.7 |
2.54:1 |
|
NC50-70(41/2IF) |
177.8 |
7 |
71.4 |
213/16 |
9150&9450 |
164.7 |
2.73:1 |
|
NC50-72(41/2IF) |
184.2 |
71/4 |
71.4 |
213/16 |
9150&9450 |
169.5 |
3.12:1 |
|
NC56-77 |
196.8 |
73/4 |
71.4 |
213/16 |
9150&9450 |
185.3 |
2.70:1 |
|
NC56-80 |
203.2 |
8 |
71.4 |
213/16 |
9150&9450 |
190.1 |
3.02:1 |
|
65/8REG |
209.6 |
81/4 |
71.4 |
213/16 |
9150&9450 |
195.7 |
2.93:1 |
|
NC61-90 |
228.6 |
9 |
71.4 |
213/16 |
9150&9450 |
212.6 |
3.17:1 |
|
75/8REG |
241.3 |
91/2 |
76.2 |
3 |
9150&9450 |
223.8 |
2.81:1 |
|
NC70-97 |
247.6 |
93/4 |
76.2 |
3 |
9150&9450 |
232.8 |
2.57:1 |
|
NC70-100 |
254 |
10 |
76.2 |
3 |
9150&9450 |
237.3 |
2.81:1 |
|
85/8REG |
279.4 |
11 |
76.2 |
3 |
9150&9450 |
266.7 |
2.84:1 |
Send product request
Other supplier products
 |
Junk Sub | products comply with API Spec.7. Junk Sub Type HoleSize Max.OD(in) SubOD(in) BoreDia.(in) Connection SLB127-3-00 ... |
 |
Integral Heavy Weight Drill Pipe | The wall thickness of heavy weight drill pipe is between drill pipe and drill collar, its structure is similar with drill pipe. It is made from pre... |
|
|
dril-collar | Non-magnetic Drill collars are made from Non-magnetic steel bars with low-strength by combining a proprietary chemical analysis and a rotary hammer... |
 |
Integral Short Drill Rod Type DZ | Integral Short Drill Rod Type DZ series are mainly used in oil field, making the connection with drilling string. Our plant manufacture various in... |
 |
The Drilling Fishing Cup | During drilling process,drilling fishing cup is applied mainly for fishing of shivers and fallen objects such as carbide tooth,drill bit and bearin... |
