Intermediate Bulk Containers
1000L intermediate bulk container (IBC), the IBC plastic container barrels, one thousand liters bucket, t barrels
Product Name: IBC barrels [820L, 1200L for domestic unique products]
Material: high molecular weight high density polyethylene (HDPE)
Capacity: 1000L (275 gallons)
Product Specifications:1200mm*1000mm*1150mm
Product Weight: 67Kg (wall thickness of the product than similar products thicker, more rugged)
Maximum allowable filling density: 2.1
Transport: the 20-foot container shipment of 20 square barrel
Product structure: outside the square barrel for hot dip galvanized tube frame (thick pipe), with plastic containers made from high molecular weight, high density polyethylene blow molding. The top of the container with a diameter of 150mm lid; the lower part of front-end drain valve with DN50 of. Framework before and after each equipped with a sign. Side barrel comes with an integrated chassis forklift from all sides to facilitate scraping.
IBC container barrels has the following advantages:
1, high molecular weight high density polyethylene, high strength, corrosion resistance, good sanitation, safe and reliable;
2, to provide maximum packaging capacity with minimal space, the space utilization increase 35% (1000L container barrels and barrels of 200L container), greatly reduce the storage and transportation costs;
3, reasonable structure, firm, can be used directly forklift loading and unloading;
4, and international standards, Dimensions comply with ISO container design standards;
5, Widely used in the packaging of dangerous goods of Class Ⅱ a variety of liquids, canned liquid density can reach 2.1;
6, the lid contains efficient reducing valve, safety and reliability;
Drain are convenient, rapid, thorough, safe and easy to clean and contribute to environmental protection;
8, the modular design of the structure, easy to replace components can be used repeatedly to extend the service life, greatly reduces packaging costs.
Other supplier products
|
|
Aluminum Tripolyphosphate |
Model APW-1 APW-2 ATP
Phosphorus pentoxide(%) ≥ 42.5-46.5 35.0-40.0 64-68
Aluminum oxide(%) ≤ 11.0-15.0 9.5-13.5 13-17
Silica(%) ≤ 13.5... |
|
|
Ammonium sulfate |
Test items Index
Exterior White crystalline
Nitrogen ％ ≥ 21
Water (Ｈ2Ｏ) ％ ≤ 0.2
free carbonic acid (H2SO4)％ ≤ 0.03
Iron (Fe) ％ ≤ 0... |
|
|
Causiu Soda flakes |
Item Index
Causiu Soda flakes（NaOH）% ≥ 99
Sodium carbonate（NaCO3）% ≤ 0.5
Sodium chloride（NaCl）% ≤ 0.03
Ferric oxide（Fe2O3）% ≤ 0.005... |
|
|
Zinc phosphate |
Project Medicine raw material special-purpose Feed additive special-purpose Sweetening agent special-purpose Rubber special-purpose Paint special-p... |
|
|
Cupric sulfate |
Test items Superior grade Feed-grade
Cupric sulfate(CuSO4.5H2O) % ≥ 98 98.5
Acidity (H2SO4) % ≤ 0.2 0.2
Water insoluble matter % ≤ 0.2 ... |
All supplier products
Same products
