Advantages of pulley lagging rubber sheet
Advantages of pulley lagging rubber sheet
Before rubber sheet bonding to roller, and the low friction coefficient between roller and belt, which easily cause slipping between them, and affect the belt load capacity, so when we bond rubber sheet to conveyor belt, it will enhance the friction coefficient and make sure highly efficiency running through the whole conveyor system.
However, when choose rubber sheet for pulley lagging, we should think twice, better choose easy bonding and high abrasion resistance rubber sheet, because the special requirement on pulley lagging rubber sheet, here we will suggest the Ramimtech Rubber sheet.
Ramimtech rubber sheet, which is the global high abrasion resistant rubber sheet for pulley lagging, whose self density can reach 1.10g/cm3, hardness can reach 60±5 ShoreA, abrasion ratio can reach 80mmAT 10N, strength elongation can reach 450%MIN, besides, whose backside contains CN semi-cured layer, when do pulley lagging, we should brush a coat of cold vulcanization glue sk313 on the CN layer, after cold vulcanization, rubber sheet and drum surface will be a whole.
Same working conditions Traditional rubber sheet Ramimtech rubber sheet
Bond to metal roller 7.1N/mm 14.3N/mm
Sulfuration Pressure 26kg/cm2 52kg/cm2
Abrasion ratio 42mm3AT 10N 82mm3AT 10N
Break strength 9MN/M2 20MN/M2
Break length 200%MIN 450%MIN
When both of rubber sheets running during the same working condition, Ramimtech pulley laggingrubber sheet has excellent abrasion ratio and unusual tenacity, for enterprises, choose Ramimtech rubber sheet, which not only enhance the conveyor system life time, but also enhance the business results.
Send product request
Other supplier products
 |
The differences between Ramimtech rubber sheet and other rubber sheet | The differences between Ramimtech rubber sheet and other rubber sheet During pulley lagging on roller surface, If rubber sheet falls off, the loss ... |
 |
Conveyor belt repair materials | Conveyor belt repair materials When mentioned about conveyor belt, many of us will think about the movement of materials, ore, coal and so on, whic... |
 |
Conveyor belt repair glue- choose belt glue SK313 | Conveyor belt repair glue- choose belt glue SK313When choose glue for repairing belt, not only we have to choose stable, high intensive, easy brush... |
 |
RAMIMTECH Cover rubber for steelcord belt hot splicing | Cover rubber sheeting for steelcord belt is an uncured rubber for hot splicing. It is designed for use as a cover rubber replacement material in sp... |
 |
what kind of glue we should use when bond metal drum with rubber? | what kind of glue we should use when bond metal drum with rubber? when we do pulley lagging , we need bond metal surface of pulley with rubber shee... |
Same products
 |
Aluminum Extrusion 6063 scrap | Seller: Willies De Scrap Inc | Are you looking for aluminum extrusion 6063 or any other type of scraps and then you are welcome ... |
 |
RUBBER ROLLER | Seller: THAKORJI TECHNOMECH | Rubber Roller Silicon Roller PU Rubber Roller Aluminium Roller- |
 |
RUBBER ROLLER | Seller: THAKORJI TECHNOMECH | |
 |
RUBBER ROLLER | Seller: THAKORJI TECHNOMECH | |
 |
" EP/NN/CC high tensile strength Conveyor Belt with heavy load capacity and good elasticity" | Seller: Haichuan Belting Co.,Ltd | .It uses ployester canvas as carcass, and its structure is the same as that of General-used Conve... |
