DY-201 Dimethyl silicone fluid oil manufacturer
Specifications
CH3)3SiO[(CH3)2SiO]n-Si(CH3)3
CAS 63148-62-9
manufacturer, lowest price great quality
ISO 9001 SGS Reach
15cp-2000kcp
DY-201 Dimethyl silicone fluid oil manufacturer
Contact: Jane Gong, e-mail:dayichemical at yahoo.com Mobiel:
Introduction
- DY-201 Two dimethyl silicone oil, chemical name is Polydimethylsiloxane, which formula is (CH3)3SiO[(CH3)2SiO]n-Si(CH3)3, this products is a kind of transparent, colourless polydimethylsilixane liquid, available viscosities ranging from 12cps to 2000000cps.
- Little change in physical properties over a wide temperature span - arelatively flat viscosity-temperature slope, and serviceability from -50°C up to 200°C.
- Excellent water repellency.
- Good dielectic properties over a wide range of temperatures and frequencies.
- Low surface tension - readily wets clean surfaces to impart water repellency and release characteristics.
- Viscosities above 10 mm²/s also exhibit heat stability, oxidation resistance, very low vapour pressures, and high flash point.
- Low order of toxicity
- Essentially odourless
- Soluble in a wide range of solvent
- Non-greasy and non-rancidifying
Technical specification
Intems index |
201-15 |
201-50 |
201-100 |
201-200 |
201-500 |
201-1000 |
Viscosity(25 °C)mpa.s |
15±2 |
50±5 |
100±5 |
200±10 |
500±50 |
1000±80 |
Flash point ≥°C) |
160 |
270 |
310 |
310 |
310 |
310 |
Specific gravity(25°C)g/cm3 |
0.930-0.940 |
0.955-0.965 |
0.960-0.970 |
0.962-0.972 |
0.965-0.975 |
0.967-0.975 |
Volatile content(≤) |
1.5 |
1.0 |
1.0 |
1.0 |
1.0 |
1.0 |
Application
RELEASE MATERIAL: Used alone or as part of a compounded formula,
DY-201 Fluid provides a non-carbonising mould release for rubber, plastics, and metal die castings.
FOAM PREVENTITIVE: Extremely small amounts of the fluid effectively control foam in many processing operations, especially in non-aqueous systems.
MECHANICALFLUID:Excellent viscosity-temperature characteristics,
thermal and chemical stability, shear-breakdown resistance, compressibility, and rubber compatibility make DY-201 Fluid outstanding for mechanical/ hydraulic uses. Typical uses include hydrolic stabilisers, damping media.
• SURFACE-ACTIVE MATERIAL: Added to vinyl plastisols,
DY-201 Fluid improves the flow characteristics, de-aerates and
lubricates the surface of the completed part.
• LUBRICANT: The fluid provides excellent lubrication for most plastic and elastomeric surfaces. Lubricity with metals depends upon the combination involved. Care should be taken to select suitable metals for pumps and other items with moving parts.
• COSMETICS AND SKIN PREPARATIONS: DY-201 Fluid is an important ingredient in hand creams, skin protectants, suntan lotions, and hair grooming aids because it forms a non-greasy, protective film which resists water and waterborne irritants, yet allows the skin to breathe. Literature is available that details the use of the fluid in cosmetics.
• POLISHES AND CHEMICAL SPECIALITIES: DY-201 Fluid is used in most automobile and furniture polishes for its ease of application,high gloss with minimum rubbing, and a durable water-repellant film. It is also used in many other speciality formulations, including aerosol starches and fabric conditioners. Additional literature is available.
• ELECTRICAL/ELECTRONIC EQUIPMENT: With excellent dielectric
properties, DY-201 Fluid can be used for both insulating and
damping applications.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
Alkyl modified white silicone grease for cosmetics(DY-A601 | DY-A601 Alkyl modified silicone grease Contact: Jane Gong, e-mail:dayichemical at aliyun.com Mobiel: DESCRIPTION: DY-A601 Alkyl modified silic... | |
DY-201 Dimethyl silicone fluid oil manufacturer | Specifications CH3)3SiO[(CH3)2SiO]n-Si(CH3)3CAS 63148-62-9manufacturer, lowest price great qualityISO 9001 SGS Reach15cp-2000kcp DY-201 Dimethyl... | |
DY-N322 Modified amino silicone oil for hair soft | Specifications ISO 9001 SGS Manufactured by ourselves competitive price Export to India Iran and so on good quality DY-DY-N322 amino silicone oil C... | |
DY-ET1101 Modified silicone oil for agricultural wetting agents | Introduction DY-ET1011 is a kind of organo-silicone surfactant for agricultural, which can make the water surface tension lowerdown to 20.5mN/m at... | |
Dimethicone and Cyclomethicone equivalent to DC1401(DY-2052) | DY-2052 Dimethicone and Cyclomethicone Similar with DC1401 personal care Contact: Jane Gong,E-mail:dayichemical at aliyun.com Mobiel: CERTIFICA... |
Похожие товары
MONSA® DDAC-50 | Продавец: Guangzhou Monsa Chemical Co., Ltd | INCI name: MONSA® DDAC-50 It functions by causing the cell membrane of bacteria to rupture... | |
MONSA® DCA-50 | Продавец: Guangzhou Monsa Chemical Co., Ltd | INCI name: disodium cocoampho diacetate Disodium cocoamphodiacetate for skinis a very mild amp... | |
MONSA® CTAC-50 | Продавец: Guangzhou Monsa Chemical Co., Ltd | INCI name: Cetyl Trimethyl Ammonium Chloride Cetyl Trimethyl Ammonium Chloride is an ammonium ... | |
MONSA® CTAC-30 | Продавец: Guangzhou Monsa Chemical Co., Ltd | INCI name: Cetyl Trimethyl Ammonium Chloride 30% Cetyltrimethyl ammonium chloride30% is mainly... | |
Инжектор Common Rail | Продавец: 德艾普( xiamen) импорт и экспорт Co., Ltd. | Артикул: Инжектор дизельного топлива Модель №: MOQ: 1 шт. Материал: Стал... |